troubleshooting
problem
●The whisk or
solution ● Adjust the height. Here’s how:
1Unplug.
2Raise the mixer head and insert the whisk or beater.
3Hold it, then loosen the nut
4Lower the mixer head.
5Adjust the height by turning the shaft. Ideally the
6Raise the head, hold the
to fit and use your round/D-shaped splashguard (if supplied)
1Raise the mixer head until it locks.
2Fit the bowl onto the base.
3 Push the splashguard on until fully located . The hinged section
should be positioned as shown round | and |
4Insert required tool.
5Lower the mixer head ensuring the splashguard follows the shape of the bowl.
●During mixing, ingredients can be added directly to the bowl via the hinged section of the splashguard.
●You do not need to remove the splashguard to change tools.
6Remove the splashguard by raising the mixer head and sliding it down.
3