III. Assembly, Stacking, Stands | Middleby Marshall PS360S, PS360WB

III. ASSEMBLY

A.Stacking

If the installation will include upper ovens mounted atop lower ovens:

1.	Remove the casters (pre-attached to each oven cavity) from
	the upper ovens.
2.	Stack the oven cavities. If necessary, refer to the Installation
	Manual for Model PS310/360 Ovens (Middleby P/N 88210-

SECTION 2 - INSTALLATION

Figure 2-3 - Exploded View, Oven Stand

Attachment

plates inc. w/

upper oven

0025).

B.Stands

If the installation includes ovens that are to be mounted on stands:

installation kit

ENGLISH

•Remove the casters (pre-attached to each oven cavity) and install them on the stands as shown in Figure 2-3.

•Assemble the ovens to the stands. An exploded view of the stand is shown in Figure 2-3.

C.Flue Vent(s)

For gas ovens, attach one flue vent to the rear wall of each oven cavity. Use one #10-16 x 3/8" and two #10-32 x 3/4" screws for each flue vent. These screws are provided in the Installation Kit.

IV. THERMOCOUPLE INSTALLATION

1.Install one thermocouple sensing bulb into each of the two holes in the rear panel of the oven, as shown in Figure 2-4. Fasten each thermocouple in place using one of the #10- 32 x 3/8" screws supplied in the Installation Kit.

2.Thread BOTH sets of thermocouple leads through the grommet and into the machinery compartment, as shown in Figure 2-4.

3.Remove the right-side access panel of the machinery compartment.

4.Thread the thermocouple leads through the side of the machinery compartment as shown in Figure 2-5, and into the electrical box (at the right-front of the machinery compart- ment).

5.Connect BOTH sets of thermocouple leads to the tempera- ture controller as shown in Figure 2-6. Note that the two thermocouples are now tied together at the temperature controller.

6.Replace the right-side panel of the machinery compart- ment.

7.Repeat Steps 1-6 for any other oven cavities in the installa- tion.

Casters inc.

w/oven

Figure 2-4 - Thermocouple Installation Locations

Thermocouples

Grommet-protected hole

Figure 2-5 - Placing the Thermocouple Leads

Figure 2-6 - Thermocouple Lead Connections

8=White=Positive

7=Red=Negative R=No Connection

Ground=Shielded cable

PS314, PS310, PS360S, PS360Q, PS360 specifications

The Middleby Marshall PS360 is a cutting-edge conveyor oven that revolutionizes the way restaurants and commercial kitchens approach food preparation. Specifically designed to enhance efficiency and optimize cooking processes, this oven has gained recognition for its ability to deliver consistently high-quality results in a fast-paced environment.

One of the standout features of the PS360 is its innovative design that incorporates advanced forced air technology. This technology ensures even heat distribution throughout the cooking chamber, resulting in perfectly cooked pizzas, sandwiches, and other menu items without the need for frequent rotation. The forced air system also reduces cooking times, allowing for increased output, making it ideal for high-demand settings such as pizzerias and fast-casual dining establishments.

The PS360 is equipped with a user-friendly digital control panel that allows chefs to easily monitor and adjust cooking temperatures and times. This interface offers precise control over the cooking process, enabling users to customize settings based on specific recipes and customer preferences. Additionally, the oven features a range of programmable settings, allowing for quick adjustments that cater to varying menu items.

Another notable characteristic of the PS360 is its durable construction. Built with high-quality materials, it is designed to withstand the rigors of a busy kitchen environment. Its stainless steel exterior not only adds to its aesthetic appeal but also ensures easy cleaning and maintenance.

Safety is also a paramount concern for the Middleby Marshall PS360. The oven is designed with built-in safety features, including safety locks and temperature alerts, which help prevent accidents and ensure safe operation. The design also accommodates ventilation needs while maximizing energy efficiency, offering a sustainable solution for restaurants looking to reduce their carbon footprint.

Moreover, the PS360 is capable of handling a wide variety of menu items, from traditional pizzas to baked goods and roasted vegetables, making it a versatile addition to any kitchen. The ability to cook multiple items simultaneously streamlines kitchen operations and increases productivity.

In summary, the Middleby Marshall PS360 is a powerful and versatile conveyor oven that combines advanced technology, user-friendly features, and durable design. It enhances cooking efficiency, ensures consistent quality, and supports restaurants in delivering exceptional dishes to their customers. Whether for high-volume operations or varied menu needs, the PS360 stands out as an invaluable tool in commercial kitchens.