How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in the oven may result in discoloring, loss of gloss, hairline cracks and popping sounds.
The
The oven is preset for a 3 hour 30 minute clean cycle, however the time can be changed. Suggested clean times are 2 hours 30 minutes for light soil and between 3 hours 30 minutes and 4 hours 30 minutes for average to heavy soil.
Once the oven has completely cooled, remove ash with a damp cloth. To avoid breaking the glass, do not apply a cool damp cloth to the inner door glass before it has completely cooled.
The oven lights will not work during the
On double oven models, only one oven can
To Self-Clean:
Before
1.On double ovens only, press UPPER OVEN or LOWER OVEN.
The cavity symbol will flash indicating which oven was chosen. The upper cavity symbol is the upper oven; the lower cavity symbol is the lower oven.
2.Press CLEAN:
1 time for 3.5 hours
2 times for 4 hours
3 times for 4.5 hours
4 times for 2.5 hours
5 times for 3 hours
Number pads cannot be used to set clean time.
3.Press START.
The oven door will automatically lock and “DOOR LOCKED,” the start time and stop time will appear on the oven display. The door will not unlock until the oven cools.
When the cycle is complete and the oven is cool, “self clean complete” will appear on the oven display and “DOOR LOCKED” will disappear.
4.Press CANCEL or UPPER CANCEL or LOWER CANCEL or open or close the oven door to clear the oven display.
To Delay Start Self-Clean:
Before delay starting
1.On double ovens only, press UPPER OVEN or LOWER OVEN.
The cavity symbol will flash indicating which oven was chosen. The upper cavity symbol is the upper oven; the lower cavity symbol is the lower oven.
2.Press CLEAN:
1 time for 3.5 hours
2 times for 4 hours
3 times for 4.5 hours
4 times for 2.5 hours
5 times for 3 hours
3.Press STOP TIME.
4.Press the number pads to enter the time of day to stop.
5.Press START.
The start time is automatically calculated and displayed.
The door will automatically lock and “DOOR LOCKED,” “DELAY,” and the stop time will also appear on the display. The door will not unlock until the oven cools.
When the start time is reached, the oven will automatically turn on.
When the cycle is complete and the oven cools, “self clean complete” will appear on the oven display and “DOOR LOCKED” will disappear.
6.Press CANCEL or UPPER CANCEL or LOWER CANCEL or open or close the oven door to clear the oven display.
To Stop Self-Clean anytime:
Press CANCEL, UPPER CANCEL or LOWER CANCEL. If the oven temperature is too high, the door will remain locked. It will not unlock until the oven cools.
General Cleaning
IMPORTANT: Before cleaning, make sure all controls are off and the oven is cool. Always follow label instructions on cleaning products.
Soap, water and a soft cloth or sponge are suggested first unless otherwise noted.
STAINLESS STEEL (on some models)
NOTE: To avoid damage to stainless steel surfaces, do not use
Cleaning Method:
Rub in direction of grain to avoid damaging.
■Stainless Steel Cleaner and Polish Part Number 31462 (not included):
See “Assistance or Service” section to order.
■Liquid detergent or
Rinse with clean water and dry with soft,
OVEN DOOR EXTERIOR
Cleaning Method:
■Glass cleaner and a soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on panel.
■
See “Assistance or Service” section to order.
CONTROL PANEL
To avoid damage to the control panel, do not use abrasive cleaners,
Cleaning Method:
■Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on panel.
15