Maytag 500 important safety instructions During the Self-Clean Cycle, After Self-Cleaning

Page 6

Care & Cleaning

5.Press the ▲ or ▼ pad to scroll through the self-cleaning settings.

•CL-H (Clean – Heavy Soil, 4 hours)

•CL-M (Clean – Medium Soil, 3 hours)

•CL-L (Clean – Light Soil, 2 hours)

Choosing the soil level of the oven automatically programs the self-cleaning time.

6.After four seconds, CLEAN, DELAY and LOCK will appear in the display to show that the oven is set for a delayed clean operation. The delay time is displayed.

During the Self-Clean Cycle

When LOCK shows in the display, the door cannot be opened. To prevent damage to the door, do not force the door open when LOCK is displayed.

Smoke and Smells

You may see some smoke and smell an odor the first few times the oven is cleaned. This is normal and will lessen in time.

Smoke may also occur if the oven is heavily soiled or if a broiler pan was left in the oven.

Sounds

As the oven heats, you may hear sounds of metal parts expanding and contracting. This is normal and will not damage the oven.

If the oven has already been set for a clean cycle and you wish to set a delay:

1. Press the DELAY pad.

• DELAY flashes.

• 00:00 will appear in the display.

2.Press the ▲ or ▼ pad to set the amount of time you want to delay the cycle.

After four seconds, CLEAN, DELAY and LOCK will appear in the display to show that the oven is set for a delayed clean operation.

The delay time is displayed.

When the Self-Clean cycle starts:

•DELAY will turn off.

•The clean time will appear in the display.

To cancel the Self-Clean cycle:

Press the CANCEL pad.

•All words disappear from the display.

•All functions are canceled.

•The time of day appears in the display.

After Self-Cleaning

About one hour after the end of the self-clean cycle, LOCK will turn off. The door can then be opened. Move door lock lever to the left to unlock.

Some soil may leave a light gray, powdery ash. Remove it with a damp cloth. If soil remains after wiping, that means the clean cycle was not long enough. The soil will be re- moved during the next clean cycle.

If oven racks were left in the oven and do not slide smoothly after a clean cycle, wipe racks and rack supports with a small amount of vegetable oil to make them easier to move.

Fine lines may appear in the porcelain because it went through heating and cooling. This is normal and will not affect performance.

A white discoloration may appear after cleaning if acidic or sugary foods were not wiped up before the self-clean cycle. This discoloration is normal and will not affect perfor- mance.

Notes:

•If the oven door is left open, “door” will flash in the display and a signal will beep until the door is closed and the CLEAN pad is pressed again.

•If more than five seconds elapse between pressing the CLEAN pad and the ▲ or ▼ pad, the program will automatically return to the previous display.

•The oven door will be damaged if the oven door is forced to open when LOCK is still displayed.

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents USE Care Guide To Prevent Fire or Smoke Damage Important Safety InstructionsRecognize Safety Symbols, Words, Labels Case of FireUtensil Safety Child SafetyCooking Safety About Your ApplianceImportant Safety Notice and Warning Cleaning SafetySelf-Clean Oven CooktopTo set Self-Clean Care & CleaningBefore Self-Cleaning To Delay a Self-Clean CycleDuring the Self-Clean Cycle After Self-CleaningCleaning Procedures Part ProcedureMaintenance Oven WindowTo protect the oven door window Storage Drawer Oven DoorLeveling Legs Oven Light style varies by modelTroubleshooting Problem SolutionOff. This is normal Continue to run after use until the oven coolsSurface Cooking Setting the ControlsSuggested Heat Settings Surface ControlsSmoothtop Surface Tips to Protect Smoothtop SurfaceTo Prevent Other Damage Cookware RecommendationsCanning and Oversize Cookware Flat Pan TestsControl Panel Using the TouchpadsOven Cooking ClockLocking the Controls TimerFault Codes BakeDelay Cook & Hold Cook & HoldBaking Differences Between Your Old and New Oven Keep Warm Changing Temp F/CTo set Broil Broiling ChartBroil Rack Total Foods PositionTo cancel Bake when in Sabbath Mode Automatic Shut-Off Sabbath ModeAdjusting the Oven Temperature To cancel the Sabbath ModeOven Light Oven FanOven Vent Oven BottomWhat is Not Covered By These Warranties Warranty & ServiceWarranty If You Need Service30-31 23-2626-29 32-33Les instructions de sécurité importantes et les paragraphes Respecter Toutes LES Instructions D’INSTALLATIONPour éviter un incendie ou des dommages par la fumée Toute Cuisinière Peut Basculer ET Provoquer DES BlessuresFamiliarisation avec l’appareil En cas d’incendieSécurité pour les enfants Cuisson et sécuritéInstructions de sécurité importantes Conserver ces instructions pour consultation ultérieure NettoyageAvertissement et avis important pour la sécurité Avant l’autonettoyagePendant le cycle d’autonettoyage Remarques Après le cycle d’autonettoyageMéthodes de nettoyage BruitsLaisser la table de cuisson refroidir avant de la nettoyer Cuisson enVitrocéramique Avec un linge propre et secLampe du four EntretienPorte du four Le style peut varier selon le modèleTiroir de remisage Pieds de réglage de l’aplombHublot du four Pour protéger le hublot de la porte du fourProblème Solution Recherche des pannesLa porte du four ne se déverrouille Les commandes et la porte sont peut-être verrouillées. VoirNettoyage recommandés. Voir Pas après l’autonettoyageCuisson sur la surface Boutons de commandeRéglage des commandes Suggestions de réglageSurface à dessus lisse Conseils de protection de la surface à dessus lissePour éviter d’autres dommages Recommandations sur les ustensilesUstensiles de grande taille et pour les conserves Tests pour vérifier si les ustensiles ont un fond platUtilisation des touches Tableau de commandeCuisson dans le four HorlogeCodes d’anomalie Verrouillage des commandesMinuterie Cuisson couranteCuisson et maintien Cuisson et maintien différéeDifférences de cuisson entre l’ancien four et le nouveau Annulation Maintien au chaudLorsque la durée d’attente s’est écoulée Programmation du maintien au chaudChangement de la température F/C Programmation de la cuisson au gril Cuisson au grilTableau de cuisson au gril Aliments Position Degré DE Temps DE CuissonAjustement de la température du four Arrêt automatique Mode sabbatAnnulation du mode sabbat Ajustement de la température du fourÉclairage du four Ventilateur du fourÉvent du four Sole du fourNe sont pas couverts par ces garanties Garantie et service après-venteGarantie Si vous avez besoin d’aide53-54 47-5050-53 55-56Canadá Lunes a Viernes, 800 a.m. a 800 p.m. Hora del Este Para evitar un incendio o daño causado por el humoEn caso de incendio Siga Todas LAS Instrucciones DE InstalacionSeguridad al cocinar Seguridad para los niñosInstrucciones generales Apague el fuego o la llama cerrando la puerta del hornoCubierta Ollas freidorasSeguridad sobre el uso de utensilios Campanas de ventilaciónConserve estas instrucciones para referencia futura Para programar ‘Self-Clean’ AutolimpiezaCuidado y limpieza Antes de la autolimpiezaDurante el ciclo de autolimpieza Después del ciclo de autolimpiezaNotas Procedimientos de limpieza Pieza Procedimiento DE LimpiezaEl estilo varía según el modelo MantenimientoLuz del horno Para reemplazar el foco del hornoGaveta de almacenamiento Ventana del hornoPuerta del horno Tornillos niveladoresProblema Solución Localización y solución de averíasMarcas de metal Cooktop Cleaning Creme. Ver págCódigos de Errores Manchas y estrías marronesProgramación de los controles Cocinando en la estufaControles superiores Ajustes de calor sugeridosCubiertas lisas Consejos para proteger la cubierta lisaPrueba de las ollas planas Recomendaciones sobre los utensiliosUtensilios para preparar conservas y de tamaños grandes La prueba de la reglaUso de las Teclas Cocinando en el hornoPanel de Control ‘Clock’ RelojBloqueo de los controles Códigos de errores‘Timer’ Temporizador ‘Bake’ Horneado‘Delay Cook & Hold’ Cocción y ‘Cook & Hold’ Cocción y mantener calienteMantener caliente diferido ‘Keep Warm’ Mantener caliente Para cancelarPara cancelar ‘Keep Warm’ Cuando el tiempo diferido ha expiradoPara programar ‘Broil’ ‘Broil’ Asar a la parrillaTabla de asar a la parrilla Posicion DE Termino DE Tiempo Total DE AlimentosCierre Automático Modo Sabático Ajuste de la temperatura del hornoRespiradero del horno Cambio de la temperatura de F/CVentilador del horno Panel inferior del hornoLo que no cubren estas garantías Garantía y servicioGarantía Si necesita servicio

500 specifications

The Maytag 500 series washer and dryer set epitomizes reliability and performance in home laundry appliances. Designed with the modern household in mind, this lineup offers an array of features that enhance the efficiency and effectiveness of laundry tasks while ensuring durable construction that is synonymous with the Maytag brand.

One of the standout characteristics of the Maytag 500 series is its robust build quality. Engineered with heavy-duty materials, these units are designed to withstand the rigors of regular use. The commercial-grade components not only contribute to longevity but also ensure a consistent and powerful performance, making them a favorite among families and individuals with demanding laundry needs.

The Maytag 500 washers are equipped with a powerful agitator that ensures thorough cleaning by moving clothes in various directions during the wash cycle. This innovative feature aids in the removal of tough stains, while the ample capacity allows users to tackle larger loads in a single wash, significantly reducing the time spent on laundry.

Additionally, the Maytag 500 series includes advanced washing technologies, such as the PowerWash cycle. This cycle combines extra cleaning action with the optimal wash temperature to deliver superior stain removal. Moreover, the MaxExtract spin technology is incorporated to extract more water from clothes during the spin cycle, resulting in reduced drying times.

The dryer companion of the Maytag 500 series also showcases cutting-edge features such as the Moisture Sensing system. This technology detects moisture levels in the load and adjusts drying time accordingly, preventing over-drying and protecting fabrics from damage. With multiple drying options and temperature settings, users can customize each cycle to suit their fabric care needs.

Energy efficiency is another hallmark of the Maytag 500 series. With energy-saving features and certifications, these appliances help homeowners reduce their energy consumption and utility bills without compromising on performance.

In summary, the Maytag 500 series stands out for its durability, efficiency, and performance-enhancing technologies. With features designed to provide superior cleaning and drying, this lineup continues to be a top choice for those seeking reliable and effective laundry solutions in their homes.
Top Page Image Contents