Operation
SmartCombi ™
4.Set the target core temperature if desired.
5.Set the chamber humidity.
6.Load the unit.
7.Press Star t/Stop (8).
The
-the set cooking temperature
-the set cooking time
-the target core temperature
4.9.5Start Delta-T cooking
Requirements Unit is switched on
NOTICE
Since the core temperature of the food being cooked is needed, you must use the core temperature sensor with
1. Press the right select button (6).
The
NOTICE
3.Press cooking mode button. The key's LEDs are lit.
The
4.Use CombiDial (9) to set the
5.Set the target core temperature with CombiDial (9).
6.Press Star t/Stop (8) to start the cooking program.
The
4.9.6Starting low temperature cooking
Low temperature cooking without core temperature measurement
50 | Operating manual |
Global Foodservice Solutions