Sears Refrigerator Ice Service, Automatic Icemaker, Ice Trays, Automatic lcemaker Accessory Kit

Ice Service

Automatic			Icemaker
(on icemaker-equipped models)
if your		refrigerator		is	lcemaker Feeler Arm in
operated			before	water	is
connected			to the
icemaker,			keep the
icemaker feeler arm in the
STOP (up)			position,
When		the refrigerator
has been connected to					o_{Jion
the	water		supply	and
the	water		has been

If ice is not used often, old cubes will become cloudy and taste stale. Empty the ice storage bin periodically and wash it in lukewarm water_

If this is your first icemaker, you will hear occasional sounds that may be unfamiliar They

are normal ice-making sounds and ore not cause for concern

Ice Trays

(on models without automatic icemaker)

To release ice cubes, turn the tray upside down, hold it over a container, and twist both ends

turned on, position the

Ice Storage Bin

For only one or tv¢o ice )_ ;_ __-_

freezer shelf for icemaking Top lugs on the multi-position shelf should be in the 6th slot u _from the bottom of the

track; the 2-position shelf

cubes, leave the tray right-

side up, twist both ends

should be in the lower position Then move the

Feeler Arm in

slightly, and	remove as	_ _(_
many cubes	as you want

ice storage bin into place under the icemaker and

move the feeler arm to the ON (down) position, The ice cube mold will automatically fill with water

after cooling to freezing temperature, and first cubes normally freeze after several hours. When cubes are solidly frozen, they wilt be eiected from the mold into the

ice storage bin by means of a sweeper arm, tcemaking will continue until the fee_er arm senses that there are

enough cubes in the bin and halts the operation

temporarily, Be sure nothing interferes with the swing of the feeler arm

For maximum ice storage, level the stored cubes with your hand occasionally

Once your icemaker is in operation, throw away the first few batches of ice cubes. This will flush

away any impurities in the water line, Do the some thing after vacations or long periods when ice isn'tused,

Move feeler arm to STOP (up) position when:

•the home water supply is to be off for several hours

•the ice storage bin is to be removed for a period

of time°

'going away on vacation. (Also turn off the valve in the water supply line to the refrigerator,)

Wash ice trays in lukewarm water only. Do not put them in an automatic dishwasher

Automatic lcemaker Accessory Kit

(optional at extra cost)

If your refrigerator did not come already equipped with

an automatic icemaker, you may add one-contact your Sears store or Sears Service Center

Water Filter Accessory

,(optional at extra cost)

Your ice cubes can only be as fresh-tasting as the water that produces them That'swhy

it'sa good idea to purify the water with a water filter,

The water filter is an optional part at extra cost and is available from your Sears Service

Center Order Filter No 978488 and it may be installed in minutes when attached to the

inlet water tube connection

Water Supply Accessory Kit (optional at extra cost)

A water supply kit containing copper tubing, shut-off valve, Fittingsand instructionsneeded to connect the icemaker to your cold water line isalso available from your Sears store or Sears Service Center

(continued next page)