Vita-Mix The Quiet One manual Important Notes

Page 21

Motor Base/Control Panel: Unplug the power cord and gently wash the outside surface with a damp soft cotton cloth moistened with a mild solution of warm water* and nonabrasive detergent or nonabrasive liquid spray cleaner. Be careful to not scratch or scrub the display window on the control panel. Never immerse motor base in water or other liquid. Dry with a soft cotton cloth.

Lid: Wash in warm, soapy water. Rinse clean under running water and dry.

Cover Door: The cover can be removed (see pages 14 and 15) and cleaned by placing under running water and washing with a soft cloth. Wipe dry and replace back on the base.

Sound Dampening Gasket and Container Centering Pad: The sound dampening gasket located between the base and the cover door can be removed for cleaning by simply pealing it off the base after the cover has been removed. (See pages 14 and 15 for cover removal).

Wash the gasket and pad in warm, soapy water. Rinse clean under running water and dry. Reassemble before use. To reinstall the sound dampening gasket, simply lay it on the base making sure that it fits snuggly against the centering pad. Replace the sound enclosure as directed on page 15. Make sure the gasket is seated properly against the blender and the centering pad. The gasket and the centering pad should be flat on the motor base.

Container: The Advance® container has been designed to be chemical resistant. However, for maximum container life, hand washing is recommended.

To Clean: Wash all container parts in warm soapy water. Rinse and drain. Do not soak the blade agitator assembly.**

To Sanitize: After all solid residue is removed, fill container 3/4 full with a sanitizing solution mix.*** Return container to motor base and firmly position the two-piece lid. Run machine on a high speed for 30 seconds. Turn machine off and allow mixture to stand in the container for an additional 1 1/2 minutes. Pour out bleach mixture.

Return container to motor base and run machine empty for an additional 5 seconds. Do not rinse after sanitizing. Allow container to air dry.

IMPORTANT NOTES!

Sound Dampening Gasket: Do not wash in the dishwasher. High temperatures and chemicals may cause the pad to swell. Do not soak. The gasket may absorb water and swell. It can take 24-48 hours of air drying before it returns to its original size.

Blade Assembly: Do not soak the blade agitator assembly.

*Be sure to wring excess water out of cloth or sponge when cleaning around the controls or any electrical part.

**To prolong polycarbonate container life, Vitamix recommends using soaps with a low PH balance, such as a liquid dishwashing detergent (Ivory Liquid®). Due to the nature of polycarbonates, automatic dishwashing is not recommended.

***Recommended sanitizing solution: 1.5 tsp. / 7,4 ml institutional or household bleach in 2 qt. / 1,9 L water.

21

Image 21
Contents Use and Care Manual Page Contents Do not use outdoors Important SafeguardsThree-prong adapters are not to be used in Canada Save These Safety InstructionsInstructions for using the Pre-Set Program Buttons GENERAL INSTRUCTIONSBlending Tips Maintenance Tips Control Panel VITA-MIX Advance Program Programming Pre-Set Buttons ProgrammingProgramming your Machine with a Custom Chip Custom Programmed ChipImportant Notes Recipe Options Arranged by recipe number # and drink type Gradually ramps up to MED-HIGH 75% Compact Cover Machine AssemblyCover Door ContainersBack Cover To remove the sound enclosureTo replace the sound enclosure One-Piece Lid Figure B Two-Piece Lid Figure aBlade Assembly Removal Blade AssemblyInstallation In-Counter MachinePreparing the counter Area Under hanging or wall On-Counter and In-Counter Blending StationCARING FOR YOUR MACHINE Important Notes Problems Possible Actions TroubleshootingCorrupt Data Warranty Motor BaseConditions Page Quiet One Parts ListItems Sold Separately Vita-MixCorporation Commercial Division SpecificationsManual de uso y cuidado Page Contenido Cuidado de la Máquina Solución de ProblemasPrecauciones importantes Instrucciones Generales ProgramaciónPrecauciones Importantes En Canadá, no se deben usar adaptadores para tres clavijas Conserve estas instrucciones de seguridadConsejos para licuar Instrucciones GeneralesConsejos para el mantenimiento Panel DE Control VITA-MIX Advance Program Programa Avanzado VITA-MIX Programación de los botones preestablecidos ProgramaciónProgramación de la máquina con un chip personalizado Por ejemplo Si quisiera programar el botón 1 con la receta¡NOTAS Importantes Aumenta a velocidad Media 51% durante 10 segundos 50%, y finalmente a Alta 100% Cubierta compacta Montaje DE LA MáquinaPuerta de la cubierta VasosCubierta posterior Para retirar la caja silenciadoraPara volver a colocar la caja silenciadora Tapa de una pieza Figura B Tapa de dos piezas Figura aRetiro del conjunto de cuchillas Conjunto de cuchillasInstalación Máquina empotradaPreparación del área del mostrador Espacio por debajo de la máquina o pared Estación licuadora de sobremesa y empotradaCuidado DE LA Máquina ¡NOTAS Importantes Problemas Soluciones Solución DE ProblemasCorrupt Data Garantía Base de motorCondiciones Page Núm Lista DE PiezasNúm Artículos que se venden por separado Vita-Mix Corporation Commercial Division EspecificacionesManuel d’utilisation et d’entretien Page Table DES Matières Ne pas utiliser pas ce produit à l’extérieur Précautions ImportantesAvertissement Conserver ces Instructions de sécuritéConseils de mélange Instructions GénéralesConseils d’entretien Programmes Préréglés Panneau DE ContrôleVITA-MIX Programme Advance Programmation des boutons préréglés ProgrammationProgrammation de votre appareil avec une puce personnalisée Puce de Programmation PersonnaliséeRemarques Importantes Puis jusquà MED 60% pendant 14 secondes Jusquà MED 50%, puis jusquà High rapide 100% Couvercle compact Montage DE L’APPAREILPorte du couvercle BolsCache arrière Pour enlever le boîtier anti-bruitPour remettre le boîtier anti-bruit Couvercle en une partie Figure B Couvercle en deux parties Figure aDémontage de l’assemblage de lames Installation Appareil intégré au plan de travailPréparation du plan de travail Dimension du modèle posé sur le plan de travail Installation électriqueDimension du modèle intégré au plan de travail Rideau ou murEntretien DE Votre Appareil Remarques Importantes Dépannage Problèmes Solutions possiblesHas Overheated Remove Garantie Socle-moteurConditions Page Liste DES Pièces Articles vendus séparément Spécifications