Vita-Mix The Quiet One manual Troubleshooting, Problems Possible Actions

TROUBLESHOOTING

Problems:		Possible Actions:
• Loud noise from blender		a. Broken or worn drive socket. Replace (Item
	container blade area	#891). Instructions are included with part.
• Container blades do not spin		b. Check blade assembly for loose, damaged
•	Increased vibration	or nicked components and replace.
		c. Tighten retainer nut with the retainer nut
• Leaking from bottom of container
		wrench moving clockwise until it is snug.
		(See page 17.)
• Loud grinding noise from the		Damaged motor bearings, your machine
	blender motor	may need to be repaired.
• Machine will not run		a. Double-check to make sure power
•	Display window does	cord is firmly in power outlet.
		b. Check to make sure the On/Off power
	not say “Ready”
		switch is in the on position.
		c. Turn the On/Off power switch to off,
		then on, to reboot the electronics.
• Machine starts then shuts off		Make sure there is power to the machine.
•	Display window reads	Let the machine cool for an hour, restart.
	“SHUT DOWN SEE MANUAL”
•	Display window reads	Let the machine cool for an hour, restart.
	“MOTOR LOCKED PROGRAM
	TERMINATED”
• Machine is running irregularly		a. Turn the machine off and on again
•	“NO PROGRAM” is displayed	to reset the programming.
	when a button is pushed	b. Try plugging the machine into a
• Button pressed starts wrong		new outlet.
	program

•Machine starts by itself

•A specific program button is defective

•Machine does not work when first tried

•Machine works but no information displayed on screen

•Program buttons run the blender on the same speed

22