5. Hydraulic cylinder
18. 1" x 4.58" Clevis pin
19. 1" x 5.08" Clevis pin
20. Wing transport lock
23. 1/4 NPT x 1/4 NPT Elbow, restricted
24. 1/2 NPT x 1/4 NPT Reducer bushing
25. 1/4 NPT x 1/4 NPT x 264" Hose
29. 1 x 8.41 Headless pin
33. 1" Flat washer
40. Lynch pin, chain & cotter asy
63. 1/4 x
Figure 29. Wing Cylinder & Wing Transport Lock Installation
Install Wing Wheel Yoke
1.Attach wing wheel yoke (6) to the wing using pivot pins (31). Make sure pin flange is on the underside of the deck. See Figure 30.
2.Secure pivot pins to deck using carriage bolts (67) and flange lock nuts (53). Carriage bolts are on the outside, lock nuts on the underside.
3.Insert wheel hub (17) into wing wheel yoke arm (6) and align holes.
4.Secure into position using cap screw (30) and flanged lock nut (53).
5.Attach wheel to hub using five lug nuts. Install the chamfered side of the lug nut toward the inside for steel rim for pneumatic tires and rims. Tighten to 75
NOTE: Install the flat side of the nut toward the inside for solid tires and aircraft tires (shown).
6.Install optional dual wheel and hub to inside of wheel yoke arm.
6. Wing wheel yoke arm, right
17. Wheel and hub
30.1/2 NC x 3 HHCS GR5
31.Pivot pin,
53. 1/2 NC Flanged lock nut
67. 1/2 NC x
Figure 30. Wing Wheel and Hub Installation - Right
38 Assembly | MAN0763 (10/10/2008) |
|
|