WINCH KIT (OPTIONAL)
REF | PART |
| QTY | DESCRIPTION | Winch Kit Operation |
A | 1019456 |
| - | Winch kit, complete | 1. Move cutter so wing is on the up slope of a ditch |
1 | 52478 |
| 4 | Idler bracket | to aid in wing lift with the winch. |
|
| ||||
2 | 6696 |
| 2 | Chain idler casting | 2. Unwind cable and remove roller (2). |
3 | 409 |
| 2 | Clevis pin, 1/2 x 2 | 3. Place cable around roller (2) and reinstall using |
4 | 22411 |
| 2 | Klik pin, 3/16 x 1 | pin (3) and klik pin (4). |
5 | 3379 | * | - | HHCS, 1/2 NC x | 4. Attach cable hook into large hole in winch |
6 | 11900 | * | - | Lock nut, 1/2 NC flanged | assembly bracket (11) and raise wing. |
| |||||
7 | 1863 | * | - | Washer, 1" SAE flat | 5. Install transport lock pin before moving unit. |
8 | 1008325 |
| 2 | Headless pin, 1 x 4 drilled |
|
9 | 1266 | * | - | Cotter pin, 3/16 x |
|
10 | 1027150 |
| 2 | Channel. .25 x 2.56 x 2.75x 38.48 |
|
11 | 1027199 |
| 1 | Channel, 3.12 x 3.25 x 10.00 |
|
12 | 12612 |
| 1 | Gear winch 5.1 to 1 |
|
13 | 12642 |
| 1 | Winch cable clamp kit |
|
14 | 11790 |
| 1 |
| |
15 | 52479 |
| 1 | Cable, 1/4" x |
|
16 | 11789 |
| 2 | Clip, 1/4 cable |
|
17 | 839 | * | - | HHCS, 3/8 NC x 1 GR5 |
|
18 | 565 | * | - | Washer, 3/8 flat |
|
19 | 838 | * | - | Washer, 3/8 lock |
|
20 | 835 | * | - | Hex nut, 3/8 NC plated |
|
|
|
| * | Standard hardware; obtain locally |
|
MAN0763 (10/10/2008) | Parts 69 |
| |
|
|