OUTPUT TERMINAL PANEL FAMILIARIZATION
Connecting Loads
Loads can be connected to the generator by the
or the convienience receptacles (Figure 14). Make sure to read the operation manual before attempting to connect a load to the generator.
To protect the output terminals from overload, a
Over Current Relay |
|
An | (Figure 15) is connected to the main |
circuit breaker. In the event of an overload, both the circuit breaker and the over current relay may trip. If the circuit
breaker can not be reset, the on the over cur- rent relay must be pressed. The over current relay is located in the control box.
Figure 15. Over Current Relay
Figure 14. Connecting Loads
PAGE 42 —