Multiquip DCA180SSJU operation manual Select Units, Setup 1- Up Display

DIAGNOSTIC DISPLAY

Select Units

1.Starting at the single or four engine parameter display touch the “Menu Button”.

5.Touch the “Enter Button” to select the highlighted units.

ENGLISH

METRIC KPA

METRIC BAR

				98%
0			3000	LOAD RPM
	1500
	1800 RPM
				14.2
ENG RPM		COOL TEMP		BATT VOLT

1000 RPM

ENG RPM

57 PSI

OIL PRES

6. Touch the “Menu Button” to return to the “Main Menu”.

2.The main menu will pop up on the display.Use the arrow buttons to scroll through the menu until the “Select Units” is highlighted.

ENGLISH	*
METRIC KPA
METRIC BAR

GO TO 1-UP DISPLAY STORED CODES ENGINE CONFG SETUP 1-UP DISPLAY SETUP-4-UP DISPLAY

SELECT UNITS

ADJUST BACKLIGHT

7.Touch the “Menu Button” to exit the Main menu and return to the engine parameter display.

3.Once the “Select Units” menu item has been highlighted touch the “Enter Button” to access the “Select Units” function.

GO TO 1-UP DISPLAY

STORED CODES

ENGINE CONFG

SETUP 1-UP DISPLAY

SETUP-4-UP DISPLAY

SELECT UNITS

ADJUST BACKLIGHT

GO TO 1-UP DISPLAY			1000 RPM
STORED CODES	98%
ENGINE CONFG		LOAD RPM	ENG RPM
SETUP 1-UP DISPLAY
SETUP-4-UP DISPLAY
SELECT UNITS	14.2		57 PSI
ADJUST BACKLIGHT		BATT VOLT	OIL PRES

Setup 1- Up Display

1.Starting at the single engine parameter display, touch the “Menu Button”.

4.Use the arrows to highlight the desired units. “English” for imperial units i.e. PSI,”F or Metric kPa, Metric Bar for IS units i.e. kPa, Bar, “C.

				98%
0			3000	LOAD RPM
	1500
	1800 RPM
				14.2
ENG RPM		COOL TEMP		BATT VOLT

1000 RPM

ENG RPM

57 PSI

OIL PRES

ENGLISH

ESPANOL

FRANCAIS

DEUTSCH

2. The main menu will pop up on the display. Use the “Arrow Buttons” to scroll through the menu until the “Setup 1-up Display” is highlighted.

GO TO 1-UP DISPLAY

STORED CODES

ENGINE CONFG

SETUP 1-UP DISPLAY

SETUP-4-UP DISPLAY

SELECT UNITS

ADJUST BACKLIGHT

DCA-180SSJU — OPERATION AND PARTS MANUAL — REV. #3 (02/01/10) — PAGE 29