Black & Decker CM1936Z, SPCM1936 For Models Without ON-DEMAND Removing Mulch Insert Figure O

Page 11

 

DANGER: Sharp moving blade. Do not operate the mower if the rear door is not closed under spring tension as serious injury could

result.Take your mower to the nearest service center for repair.

 

 

 

FOR MODELS WITHOUT "ON-DEMAND" REMOVING MULCH INSERT - FIGURE O

 

To remove the mulch insert O-3so that you can bag or discharge the grass, follow the steps listed below:

 

 

1.

Release bail handle to turn mower off, wait until the blade stops and remove safety key.

 

 

2.

Raise the rear discharge door O-2and hold it up.

 

 

 

3.

Locate your hand in the handle pocket O-4, lift and pull out the mulch

 

 

 

4.

insert O-3 completely.

 

 

4

The rear discharge door is spring loaded. When you release it the door

 

 

 

will return to the closed position. Ensure the door rests firmly against

 

 

 

the deck.

 

 

 

INSTALLING MULCH INSERT - FIGURE P

 

3

1

1.

Repeat steps 1 and 2 for removing mulch insert.

 

2.

To insert mulch insert P-1, push it until contact is made with the out-

 

 

 

side of the deck. Then lift slightly so that mulch insert rib P-2is within

 

 

2

3.

deck groove P-3.

 

 

Release rear door P-4and ensure it is properly closed.

 

 

OPERATINGTHE MOWER FOR DISCHARGING

 

 

 

To operate the mower in Rear Discharge mode:

 

 

 

1.

Remove the grass catcher Q-2 or mulch insert O-3.

 

 

 

2.

Ensure the rear discharge door rests firmly against the deck.

 

 

 

The mower is now in Rear Discharge mode. The cut grass will be

 

 

 

deposited below the closed door exit onto the lawn.

1

4

 

INSTALLING GRASS CATCHER - FIGURE Q, R

 

1.

Release bail handle to turn mower off, wait until the blade stops and

 

2.

remove safety key.

 

 

 

Reaching down between the mower handles, raise the rear discharge

 

 

 

 

door Q-1to a vertical position and hold the door up. Ensure that the

 

 

 

3.

mulch insert O-3 has been removed.

 

 

 

Pick up the grass catcher Q-2by the handle Q-3and place the grass

 

 

 

 

catcher between the mower handles as shown.

 

 

3

 

 

 

2

 

 

 

 

4.Position the grass catcher hanger hooks Q-4on the mower as shown in figure R. Release the rear discharge door.

Sharp moving blade. Never operate the mower unless

theDANGER:hanger hooks on the grass catcher are seated properly on the mower and the rear discharge door rests firmly against the top of the grass catcher as serious injury could result.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents VEA EL Español EN LA Contraportada Please Read Before Returning this Product for ANY ReasonKEY Information YOU should Know To Reduce Risk of Injury Read ALL InstructionsVolts USE of Extension CordsFunctional Description CM1936Z 310Functional Description SPCM1936 Preparation AssemblyHandle Assemblyfigure C Handle Adjustment Figure DGrassbag Frame Clip Assembling the Grass Catcher Figures E1, E2, E3, E4Charger Safety Rules BatteryBatteryruntime Indicator Figure H Removing Battery from Mower FigureKnow Your Mower Safety KEY Charging PROCEDURE- Figures J, K, LVariable Speed Self Drive System Figure N ON-OFF Switch Bail Handle Figure MMeets Cpsc Safety Requirements To Turn Mower onOperatingthe Mower for Discharging Installing Mulch Insert Figure PInstalling Grass Catcher Figure Q, R For Models Without ON-DEMAND Removing Mulch Insert Figure OFor Models with ON-DEMAND Discharge ModeBagging Mode Your mower is now in Bagging mode Mulching Mode19mm wrench U-2 as shown in figure U MaintenanceRemoving and Installing Blade Figure U Mulching Mowing TipsLubrication CleaningBlade Sharpening Blade BalancingOFF-SEASON Storage Battery Service and InstallationStorage Position Problem Solution Troubleshooting GuideCenter for Servicing WarrantiesGuide DʼUTILISATION Lire Toutes CES Directives Conserver CES Mesures Utilisation DE Rallonges Description Fonctionnelle CM1936Z Description Fonctionnelle SPCM1936 Ensemble DE Poignée Figure C PréparationAssemblage Déballage Illustrations A, BMontage DU Collecteur Dherbe Illustrations E1, E2, E3 ET E4 Avec Lecentre DE Réparation DE Votre Région OU Composer LE PileRetrait DE LA Pile DE LA Tondeuse Illustration Règles DE Sécurité Pour LE ChargeurConnaître SA Tondeuse Lire LE Mode Demploi ET LES Règles DE Sécurité AvantFonctionnement Procédure DE CHARGE- ILLUSTRATIONSJ, K, LSurcharge DE LA Tondeuse Démarrage DE LA TondeuseInterrupteur DE MARCHE/ARRÊT Anse Illustration M SPCM1936 SeulementPour LES Modèles Sans « Sélection DE Installation DE LA Pièce DE DéchiquetageTondre EN Mode Déjection Installation DU Collecteur DherbeMode de déchiquetage Pour LES Modèles Avec « Sélection DE Mode »Mode déjection Mode densachageConseils Pour LE Déchiquetage EntretienConseils Pour Tondre LA Pelouse Affûtage DE LA Lame Dans UN Étau Retrait ET Installation DE LA Lame Illustration UAffûtage DE LA Lame Lors DE Laffûtage DE LA LameTransport ET Rangement Équilibrage DE LA LameNettoyage Prévention DE LA Corrosion800 Entretien ET Installation DE LA PileRangement Hors Saison LE Sceau Srprc Recyclage DES Piles RechargeablesCoupe inégale et une décharge rapide de la batterie Problème SolutionRemarque Page Manual DE Instrucciones Pautas DE SEGURIDAD/DEFINICIONES Page Volts Longitud total del cable en pies USO DE Cables ProlongadoresDescripción DE LAS Funciones CM1936Z Descripción DE LAS Funciones SPCM1936 Ensamblaje DEL Mango Figura C PreparaciónEnsamblaje Desembalaje Figuras A, A1, A2Ensamblado DEL Recolector DE Césped Figuras E1, E2, E3, E4 Normas DE Seguridad DEL Cargador BateríaIndicador DE Duración DE LA Batería Retiro DE LA Batería DE LA PodadoraLlave DE Seguridad Procedimiento DE Carga Figura J, K, LConozca LA Podadora Cumple CON LOS Requisitos DE Seguridad DE LA Cpsc Para Encender LA PodadoraSPCM1936 Únicamente Sobrecarga DE LA PodadoraOperación DE LA Podadora Para Descarga Protector DE Seguridad Y Puerta Trasera Figura OPara Modelos SIN Operación Según Instalación DE LA Pieza Para Mantillo FiguraModo de formación de mantillo Para Modelos CON Operación Según RequerimientoModo de descarga Modo de recolección en bolsaConsejos Para EL Corte DE Césped Para Formar Mantillo MantenimientoConsejos Para EL Corte DE Césped Para Afilar LA Hoja EN UNA Prensa Retiro E Instalación DE LA Hoja Figura UAfilado DE LA Hoja AL Afilar LA HojaPrevención DE LA Corrosión Simetría DE LA HojaLubricación LimpiezaEL Sello Rbrc Reciclado DE Baterías Mantenimiento E Instalación DE LA BateríaGarantía en la cubierta GarantíasProblema Solución Guía DE Solución DE ProblemasProduct Infomation · Identificación DEL Producto ProblemaSolamente Para Propositos DE Mexico Años DE GarantiaEsta Garantia no Aplica Cuando

CM1936Z, SPCM1936 specifications

The Black & Decker SPCM1936, also known as the CM1936Z, represents a standout choice in the realm of cordless lawn mowers, combining innovation with user-friendly design to deliver efficient lawn care. This model is powered by a robust 36V lithium-ion battery, which offers ample runtime to handle medium to large-sized yards without the nuisance of cords or gas.

One of the primary features of the SPCM1936 is its lightweight construction, making it easy to maneuver across various terrains. Weighing significantly less than many traditional gas mowers, the SPCM1936 allows users to navigate tight spaces and intricate landscaping effortlessly.

The mower comes equipped with a 19-inch cutting deck, striking a balance between agility and the ability to cover large areas quickly. The deck material is designed to be durable yet lightweight, ensuring longevity and ease of use. This model offers a 6-position height adjustment feature, allowing users to customize their mowing height from 1-inch to 3-inches, giving flexibility for different grass types and seasonal changes.

Technology is at the forefront of the Black & Decker SPCM1936's design. It boasts a Smart Cut technology, which automatically adjusts the power of the motor based on the thickness of the grass being cut. This ensures optimal performance while conserving battery life, enhancing efficiency and extending the runtime during use.

Another critical feature is the mower's EdgeMax design, which allows the blade to cut closer to edges and flower beds, reducing the need for trim work and making the mowing process quicker and less labor-intensive. The mower also features a bagging system that collects grass clippings, promoting cleaner yard maintenance, while its mulching capability returns nutrients back to the soil.

The SPCM1936 is designed with user comfort in mind, featuring an easy-to-handle ergonomic grip and a foldable handle for convenient storage. With safety features like a safety key and a blade brake, users can operate the mower with peace of mind.

In summary, the Black & Decker SPCM1936, CM1936Z is an advanced, efficient, and user-friendly cordless lawn mower, perfect for homeowners seeking reliability and ease in lawn maintenance. Its combination of power, innovative technology, and smart design makes it a top contender in the cordless mower market.
Top Page Image Contents