Main
EN FR ES
01GB00PXAH800.book Page 1 Tuesday, February 8, 2011 9:04 PM
ALPINE PXA-H800_EN 68-13530Z65-A (B5)
PXA-H800
Page
ENGLISH
1
Contents Operating Instructions
From a PC
WARNING
Getting Started
2
Use the Multi Channel Function
From the Commander
Basic Operation
Automatic Measurement Function
3
Other Useful Features
Information
4
Operating Instructions
NOTICE
WARN ING
5
01GB00PXAH800.book Page 5 Tuesday, February 8, 2011 9:04 PM
Getting Started
6
Location of Controls
PXA-H800
Sound Manager for PXA-H800
7
RUX-C800 Commander (sold separately)
8
Features
About the Audio Setting
e Availability of operations
Before You First Use the Unit
9
Installing Sound Manager for PXA-H800
10
Initial System Start-Up
Loading the Setup Data (File)
Basic Operation
Saving the Setup Data (File)
11
Audio Adjustment
Loading the ImprintEQ Measurement Data (File)
Viewing the Version Information (Option)
Downloading the Software (Option)
12
Drag [ ] or click [ ] or [ ] to make adjustments.
Setting Defeat
Click [ON] or [OFF] for Defeat in the main menu.
Switching the Sources
13
Click one from [Preset 1] to [Preset 6], and then click [OK].
Recalling a Stored Setting (Preset Call)
Click [Call] for Preset in the main menu.
Click one from [Preset 1] to [Preset 6], and then click [OK].
14
4-1
4-2
First time start-up:
Subsequent start-up:
15
Click either [High] or [Low] for each AUX to set and click [OK].
Click [OK] when a confirmation message appears.
Setting and Adjusting the AUX Input/ Digital Input (Analog AUX Input/Digital AUX Input)
Click [Input Setup] for [Shortcut] tab in the main menu.
Measurement Function
17
Setting ImprintEQ
18
19
Turning ImprintEQ On/Off
Saving ImprintEQ Measurement Data on a PC
Adjusting and Saving the Target Curve
20
Adjusting the Time Correction Automatically (Auto TCR)
Turn the Ignition switch of the vehicle to ACC (On).
Click [Auto TCR] for [Shortcut] tab in the main menu.
Click [Setup] for Auto TCR.
21
Click [Setup] for RoadEQ.
Turning RoadEQ On/Off
When a confirmation message is displayed, check the content and click [OK].
Click [START] in the measurement start screen.
Audio Setup/ Adjustment
23
When setting is complete, click [Close Window].
Setting the Graphic EQ
Click [G.EQ] for [Shortcut] tab in the main menu.
Click [G.EQ] in the main menu.
24
Click a frequency and drag up or down to adjust the level.
To adjust another channel, repeat Steps 4 through 5.
When setting is complete, click [Close Window].
Displaying the data
25
Setting the Parametric EQ
Click [P.EQ] for [Shortcut] tab in the main menu.
Click [P.EQ] in the main menu.
Click either [ ] or [ ].
26
Displaying the data
Click either [ ] or [ ].
About the Crossover (X-Over)
Crossover (X-Over):
27
Click the channel you want to adjust.
Drag the setup point up or down or to the right or left to make adjustments.
Click [0] or [180] to switch the phase.
To adjust another channel, repeat Steps 3 through 5.
28
ALPINE PXA-H800_EN 68-13530Z65-A (B5)
Displaying the data
Adjusting the Time Correction (TCR)
e Calculation of time correction
29
30
Setting the 2-Channel Signal Playback Mode (2ch Playback Mode)
Click [Multi Channel Manager] of the Function switching tab.
Set and adjust 2ch Playback Mode, EUPHONY, Dolby Pro Logic II.
Use the Multi Channel Function
Setting the 2-Channel Signal Playback Mode (2ch Playback Mode)
Setting EUPHONY (EUPHONY)
31
Using Dolby Pro Logic II (Dolby Pro Logic II)
32
Adjusting the Center Width (Center Width)
Click [ON] for Dolby Pro Logic II - Center Width.
Click [ ] and select and click a level.
Multi Channel Function Adjustment Procedure
33
ALPINE PXA-H800_EN 68-13530Z65-A (B5)
When setting is complete, click [Close Window].
Click [Start] for Test Tone Output.
Select a channel and click.
34
Click [ON] of Center Bass Split.
Adjusting the DVD Level (DVD Level)
Setting the Linear PCM (PCM Mode)
Click [ ] for Frequency and select and click a frequency you want from the pull-down me nu.
Basic Operation
Adjusting Subwoofer (SUBWOOFER)
Navigation Audio Volume Adjustment (NAVI LEVEL)
36
When an Ai-NET compatible head unit is connected:
When an Ai-NET compatible head unit is not connected:
Switching the Sources
Press [SOURCE].
37
Recalling a Stored Setting (Preset Call)
Setting the Speaker System (System Select)
38
7-1
7-2
Setting the Speakers (Speaker Setup)
Setting the Subwoofer Output (SW Channel)
39
Setting the AUX Input System (AUX Input Setup)
Setting the AUX Input (AUX IN)
40
41
Naming the AUX Input (AUX Name)
Mixing Navi Audio Guidance (Navi Mix Setup)
42
Before Performing Automatic Measurement
Automatic Measurement Function
43
Turning RoadEQ On/Off
Adjusting for Road Noise (RoadEQ)
44
Setting the MX Plus (Ai-NET Mode)
Audio Setup/ Adjustment
45
Setting the MX Plus (Standalone Mode)
46
Setting the Equalizer Mode (EQ Mode)
Setting the Graphic EQ
47
Select the channel you want to adjust by pressing [CHANNEL].
Select the frequency by rotating the [Rotary encoder], and press the [Rotary encoder].
Adjust the level by rotating the [Rotary encoder], and press the [Rotary encoder].
To adjust another frequency, repeat Steps 6 and 7.
48
Select the band by rotating the [Rotary encoder], and press the [Rotary encoder].
Adjust the frequency by rotating the [Rotary
Adjust the bandwidth (Q) by rotating the [Rotary
Adjust the level by rotating the [Rotary encoder], and press the[Rotary encoder].
49
Adjusting X-Over and Switching the Phases
50
Adjusting the Time Correction (TCR)
e Calculation of time correction
e Entering the time correction
51
Setting the Time Correction Adjustment Unit (TCR Parameter)
52
Setting the 2-Channel Signal Playback Mode (Mode)
Setting EUPHONY (EUPHONY)
Use the Multi Channel Function
53
Using Dolby Pro Logic II (Dolby PLII)
54
Multi Channel Function Adjustment Procedure
In case of combining the Automatic adjustments, etc.
Adjusting the Speaker Volume Level (Output Level)
Rotate the [Rotary encoder] to select Multi Ch. Setup, and then press the [Rotary encoder].
55
Adjusting the Acoustic Image (BI- PHANTOM)
Mixing the Low Range Audio for the Rear (Rear Mix)
56
Mixing the Low Range Audio of the Center with the Front L/R (Center Bass Split)
Setting the Linear PCM (PCM Mode)
Achieving Powerful High Volume Sound (Listening Mode)
57
Other Useful Features
58
59
Switching the Display
Press [VIEW].
60
System Configuration
Information
61
Terminology
Dolby Digital
DTS
Dolby Pro Logic II
62
In Case of Difficulty
Indication (Commander RUX-C800)
Calibration Error No Mic No Mic/RoadEQ Off No Data System Mismatch
63
Specifications
64