Alpine owner manual Installing Sound Manager for PXA-H800, Start Sound Manager for PXA-H800

Installing Sound Manager for PXA-H800

When you install Sound Manager for PXA-H800 on a PC, you can set/ adjust the audio settings on the PC.

Caution before installing:

•This Program runs under Microsoft® Windows® XP, Vista, 7 only.

Recommended specifications

OS: Windows XP, Windows Vista , Windows 7

CPU: 1.6 GHz or higher

Memory: 1 GB or higher

HDD: 512 MB or more available space

Display: 1024×576 or higher

•Install the Sound Manager software for PXA-H800 before connecting the PXA-H800 to your personal computer.

•Before installing, all active programs must be stopped.

1 Insert the supplied CD-ROM (Sound Manager for PXA-H800) into the CD-ROM drive. Run the setup.exe file. Follow the installation instructions on the screen.

2 Connect a PC to Computer connection terminal of PXA-H800 with the included USB cable.

USB Cable

•Install the PXA-H800 in your vehicle before you connect a PC to it (refer to the Installation manual). Turn the ignition key to the ACC or ON position.

3 Start Sound Manager for PXA-H800.

CAUTION

•Strictly observe the Warnings and Cautions written by the manufactures of your PC and peripheral equipment.

•We do not accept responsibility for data lost due to the incorrect operation of the Sound Manager for PXA-H800. We recommend you to back-up your important data regularly.

About the OFFLINE mode

Sound Manager for PXA-H800 checks the connection with the PXA- H800 at startup. When the connection is detected, it starts in the online mode. If the connection is not detected, a message will be displayed.

To start the PXA-H800 in the offline mode, click [OFFLINE]. To set in the offline mode, perform the following steps to reflect the settings on the PXA-H800.

1 After making adjustments and settings, save the data on the PC, referring to “Saving the Setup Data (File)” (page 10).

2 Close Sound Manager for PXA-H800.

3 Connect to the PXA-H800 to your PC and start Sound Manager for PXA-H800 in the online mode.

•Install the PXA-H800 in your vehicle before you connect a PC to it (refer to the Installation manual). Turn the ignition key to the ACC or ON position.

4 Load the data saved on the PC referring to “Loading the Setup Data (File)” on page 10.

The settings of Sound Manager for PXA-H800 are reflected on the PXA-H800.

9-EN