Alpine PXA-H800 45

45-EN

01GB07PXAH800.fm

ALPINE PXA-H800_EN 68-13530Z65-A (B5)

From the Commander

Press [ ] twice to go back to the screen for Step 3.

Rotate the [Rotary encoder] to select “Level

Adjustment,” and then press the [Rotary encoder].

Select the source for the head unit by rotating the

[Rotary encoder], and press the [Rotary encoder].

CD/Compressed Data/FM/Digital Radio/DVD/AUX/Others

Select the level you want by rotating the [Rotary

encoder], and press the [Rotary encoder].

MX Plus level increases in the following order: 1 2 3.

FM (Level 1 to 3, OFF):

The medium to high frequencies become clearer, and produces well

balanced sound at all frequencies.

CD (Level 1 to 3, OFF):

CD mode processes a large amount of data during playback.

MX takes advantage of this large data quantity to reproduce a more

clear, clean output.

Compressed Data/Digital Radio (Level 1 to 3, OFF):

This corrects information that was lost at the time of compression.

This reproduces a well-balanced sound close to the original.

DVD (Cinema, Action, Music, OFF):

Cinema:

Movie dialogue is clearly reproduced. Action movies are

reproduced with more powerful sound.

Action:

Action movies are reproduced with more powerful sound.

Music:

Lower register sounds (drums, bass, etc.) and vocals are

emphasized for clean and clear output.

AUX / Others (Compressed, Music, DVD, OFF):

MX mode suitable for the media (Compressed Data, Music,

DVD) can be selected.

To adjust another source, press [ ] and repeat

Steps 8 through 9.

•You can listen with Defeat OFF (adjusted setup values) or with

Defeat ON (Initial value) to compare, by following the st eps below.

1 Press and hold the [Rotary Encoder] for 2 seconds or

longer while in the adjustment mode.

2 R otate the [Rotary Encoder] to switch on/off Defeat, and

listen to compare.

3 To exit, select “OFF” and then press [ ].

When the setting is complete, press and hold [ ]

for at least 2 seconds.

•If [ ] is pressed during setting, the unit returns to the previous

item.

•To enable this function, Defeat should be is set to ON.

•After the setting, it is recommended to store the setting contents on

the unit. For details, refer to “Storing the Preset Values (Preset

Store)” (page36).

Setting the MX Plus (Standalone Mode)

MX (Media Xpander) Plus enhances the vocal and instrumental sounds

for music sources such as radio/CD/MP3, by generating harmonics l ost

during digital processing. This high frequency compensation adds

clarity and detail normally lost to road noise.

In the Standalone mode, MX Plus does not become linked with the

source of the head unit. MX Plus should be set for each external input .

MX Plus mode will be switched, linked with the source switching of

PXA-H800.

Press [FUNC.].

Rotate the [Rotary encoder] to select “MX Plus,” and

then press the [Rotary encoder].

Rotate the [Rotary encoder] to select “MX Plus

Setup,” and then press the [Rotary encoder].

Rotate the [Rotary encoder] to select “ON,” and then

press the [Rotary encoder].

When you select [OFF], MX Plus for all music sources

becomes disabled.

If an Ai-NET compatible head unit is connected, go to

Step 5.

If an Ai-NET compatible head unit is not connected, go to

Step 6.

Rotate the [Rotary encoder] to select “Standalone,”

and then press the [Rotary encoder].

•When a head unit without the MX Plus linking function is connected,

this should be set as “Standalone,” even if it is an Ai-NET compatible

head unit.

Press [ ] once or twice to go back to the screen

for Step 3.

Rotate the [Rotary encoder] to select “Level

Adjustment,” and then press the [Rotary encoder].

Select the source for each external input by rotating

the [Rotary encoder], and press the [Rotary

encoder].

01GB00PXAH800.book Page 45 Tuesday, February 8, 2011 9:04 PM