From the Commander
4 Select one from “OFF” and “Level 1” through “Level 3” by rotating the [Rotary encoder], and press the [Rotary encoder].
Level 1: Low correction level. Suitable for quiet vehicles.
Level 2: Moderate correction level.
Level 3: High correction level. Suitable for high speed driving.
•If you do not use RoadEQ is not used, select “OFF”.
5 When the setting is complete, press and hold [ 
] for at least 2 seconds.
•If [ 
] is pressed during setting, the unit returns to the previous item.
•If measurement is not yet completed, or no microphone is connected, this setup is disabled.
•When you change the speaker setting of On/Off, RoadEQ automatically becomes off. When you have changed the speaker settings, start the measurement step over again.
•After the setting, it is recommended to store the setting contents on the unit. For details, refer to “Storing the Preset Values (Preset Store)” (page 36).
Audio Setup/
Adjustment
CHANNEL
|
|
|
|
|
|
|
|
|
|
|
|
FUNC. | MUTE | ||
|
|
|
|
Rotary encoder
Setting the MX Plus (Ai-NET Mode)
MX (Media Xpander) Plus enhances the vocal and instrumental sounds for music sources such as radio/CD/MP3, by generating harmonics lost during digital processing. This high frequency compensation adds clarity and detail normally lost to road noise.
This feature becomes enabled when an
•When a head unit with the MX Plus linking function, such as INA- W910, is connected, it should be set to
1 Press [FUNC.].
2 Rotate the [Rotary encoder] to select “MX Plus,” and then press the [Rotary encoder].
3 Rotate the [Rotary encoder] to select “MX Plus Setup,” and then press the [Rotary encoder].
4 Rotate the [Rotary encoder] to select “ON,” and then press the [Rotary encoder].
•When you select [OFF], MX Plus for all music sources becomes disabled.
5 Rotate the [Rotary encoder] to select
MX Plus will become linked to the head unit.
•When a head unit without the MX Plus linking function is connected, this should be set as “Standalone,” even if it is an
