3Com ENTERPRISE OS 11.3 manual You must be logged in as root for this procedure UNIX

30CHAPTER 4: UPGRADING USING THE NETBUILDER UPGRADE LINK APPLICATION

Values

tftpboot	For UNIX: Directory specified in inetd or tftpd for tftpd files.
%tftpboot%	For Windows (using the default 3Com TFTP server): Directory
	specified in the 3Server configuration.
<platform>	NETBuilder II with CEC Module:	NBII
	NETBuilder II with DPE Module:	NBDPE
	SuperStack II NETBuilder SI bridge/router:	NBSI
	SuperStack II NETBuilder Ethernet	NBRO
	bridge/router:
	SuperStack II NETBuilder Token Ring	NBR2T
	bridge/router:
	SuperStack II NETBuilder Ethernet/ISDN	NBRI
	bridge/router:
	SuperStack II NETBuilder Token Ring/ISDN	NBR2TI
	bridge/router:
	OfficeConnect NETBuilder bridge/router:	NBOCF
	PathBuilder S5xx switch:	NBPB500
<package>	Two letter designator shown on the CD-ROM label.
[SW FW]	The software or firmware directory.
<version>	Software version 9.0 through 11.3.

Procedure To install the new software on the NMS, follow these steps:

You must be logged in as root for this procedure (UNIX).

1You can install the software from a CD-ROM, a tar archive, or a boot image (image-only upgrade). If you are installing from a CD-ROM, mount the CD-ROM on the NMS.

See Appendix C for information on how to mount the CD-ROM on a UNIX system.

2For UNIX, log in as root.

3Run Upgrade Link if you have not already done so.

4Select Install a SW Package on NMS from the Console page.