Upgrading Hardware and Software

49

management stations by entering the IP address of the network management station that will have access.

For example, enter:

ADD -SNMP MANager “sysadm” 129.213.224.1

7Copy the upgraded software to the bridge/router using:

bcmsysupgrade -s:to_nb -m -new_hw <device>

8Accept your upgrade using:

bcmsysupgrade -s:accept -m -new_hw <device>

The bridge/router reboots.

9Verify that your upgrade completed successfully.

To verify that the software is working properly, you can perform a set of operational integrity checks on the newly upgraded bridge/router. These may include:

■Some standard checks based on services active.

A basic service verification test can Ping to specific IP addresses.

■Connectivity checks based on network topology. Examples of a connectivity verification include:

■Checking the connectivity between devices on different networks, through designated bridge/routers.

■Testing typical device connections on terminals, printers, or hosts.

■Testing the connectivity with specific NETBuilder bridge/routers.

■Custom checks based on applications and typical network use.

For instance, you can check normal operation over the network and perform file transfers, as well as run traces on specific routes or check routing tables.

10If you determine that the new software does not meet your requirements, you can reject the upgrade, and revert to the software version you were running before the upgrade, by using the bcmrestore utility.

To reject your upgrade, use:

bcmrestore -new_hw <device>

11NETBuilder II only — If the upgrade is successful, and the NETBuilder II bridge/router has a multiport HSS module or an MP module, upgrade the firmware for all these modules using:

bcmsysupgrade -s:upgrade_io_fw -m <device>

The bridge/router reboots after the firmware is upgraded.

If the Bridge/Router or Switch Does Not Boot

If a failure causes the bridge/router not to boot, or if the bridge/router or switch is inaccessible using Telnet, you must configure the bridge/router or switch at the local console to reestablish IP connectivity. After connectivity is reestablished, you can use the bcmrestore utility to return the bridge/router or switch to a preupgrade state. See Chapter 7 for connectivity and recovery procedures.

Page 48 Page 50
Page 49
Image 49
3Com ENTERPRISE OS 11.3 manual Bcmsysupgrade -stonb -m -newhw device
Page 48 Page 50

ENTERPRISE OS 11.3 specifications

3Com Enterprise OS 11.3 is a robust network operating system designed specifically for enterprise-level applications, offering a comprehensive suite of features and technologies that enhance network performance, reliability, and security. Engineered for the needs of large organizations, this operating system integrates advanced functionalities that ensure efficient management of network resources.

One of the key features of 3Com Enterprise OS 11.3 is its enhanced routing capabilities. It supports dynamic routing protocols like OSPF and RIP, ensuring optimal path selection and efficient use of network bandwidth. This enables seamless communication across multiple network segments, reducing latency and improving overall system responsiveness.

Another significant characteristic of this OS is its powerful network management tools. The built-in management functionalities provide administrators with an intuitive interface to monitor, configure, and troubleshoot network devices in real time. With features like SNMP (Simple Network Management Protocol) support, network visibility is improved, allowing for efficient performance monitoring and rapid response to potential issues.

Security is a critical focus for 3Com Enterprise OS 11.3, which includes comprehensive measures such as access control lists (ACLs), robust authentication methods, and support for Virtual Private Networks (VPNs). These security features safeguard sensitive data and ensure that only authorized users can access network resources, mitigating the risk of unauthorized access and potential data breaches.

The operating system is also designed for scalability, accommodating the growing needs of enterprise environments. Its modular architecture allows for the integration of additional features and services without sacrificing performance. This flexibility makes it suitable for both small businesses and large enterprises, adapting to various networking requirements as they evolve.

Furthermore, 3Com Enterprise OS 11.3 facilitates quality of service (QoS) management, which prioritizes critical network traffic. By ensuring that time-sensitive applications receive the bandwidth they need, the OS enhances the performance of voice, video, and data services, which is crucial for maintaining high productivity levels.

In summary, 3Com Enterprise OS 11.3 stands out with its advanced routing capabilities, robust network management tools, enhanced security features, scalability, and QoS management. These characteristics make it an ideal solution for enterprises seeking a reliable and efficient network operating system to support their complex networking needs.
Top Page Image Contents