3Com ENTERPRISE OS 11.3 manual Management chapter in Using NETBuilder Family Software

The TFTP safe directory is the root directory under which the utilities will store your bridge/router files.

Check that your TFTP safe directory exists.

Installation Troubleshooting Messages 89

	The bridge/router is not responding to SNMP set requests. Ensure that the
	SNMP service is configured on the bridge/router and that you have read
	and write access via SNMP. Also check the values of the community strings
	in the /etc/snmp.cfg file. They should match the bridge/router’s SNMP
	community strings.
	Meaning:	The bcmdiagnose utility has attempted to verify whether the
		bridge/router specified by the <IP address> value has been configured.
	Action:	Configure the SNMP server on your bridge/router to allow write
		access to your network management station. See the Network
		Management chapter in Using NETBuilder Family Software.
	SNMP read access OK
	Meaning:	There is no problem with SNMP configuration on the bridge/router.
	Action:	None.
	Testing SNMP write access
	Meaning:	This is an introductory message. Check to see if SNMP Service is active
		on the bridge router.
	Action:	None.
	SNMP write access OK
	Meaning:	There is no problem with SNMP configuration on the bridge/router.
	Action:	None.
Testing the NMS/ TFTP	Creating an Upgrade File
Configuration	Testing file transfers using TFTP
	Meaning:	This is an introductory message displayed as the bcmdiagnose utility
		begins its test.
	Action:	None.

The TFTP safe directory is <tftpboot_dir>. Make sure that the TFTP safe dir exists.

Meaning:

Action:

The directory <tftpboot_dir> does not exist. Create <tftpboot_dir> with full read/write/create file permissions. Make sure that this directory has the proper file access permissions and is being used by the TFTP server.

Meaning: The bcmdiagnose utility has attempted to create a test file using the TFTP safe directory and has failed.

Action: Assign full read/write/create file access permissions to the TFTP directory.

Creating "test3.com"

Meaning: This information message is displayed while the UNIX copy command tries to create the test file.

Action: None.

Could not remove "test3.com". Check that <tftpboot_dir> and subdirectories have full read/write/create file permissions

Meaning:	The UNIX remove command could not delete the test file.
Action:	Assign full read/write/create file access permissions to the directories.