3Com ENTERPRISE OS 11.3 manual Version 11.2 Software Packages continued, bcmuname -M device

20CHAPTER 3: PLANNING AND PREPARING THE UPGRADE

Table 2 Version 11.2 Software Packages (continued)

			Flash Memory Required for:
Software Package	Model	DRAM Required	Automatic Recovery	Manual Recovery
OfficeConnect NETBuilder:
(FD) - FRAD	120	8 MB	4 MB	4 MB
(NW) - IP/IPX/AT Router	112, 122, 132, 142	8 MB	4 MB	4	MB for 132
				2	MB for all others
(BF) - Boundary Router	113, 123, 143	8 MB	8 MB	4	MB
(OF) - Multiprotocol Router	117, 127, 137, 147	12 MB	8 MB	4	MB
(AF) - APPN	116, 126, 146	12 MB	8 MB	4	MB
(NE) - IP/IPX/AT Router with 56-bit	112, 122, 132, 142	8 MB	4 MB	4	MB for 132
Encryption				2	MB for all others
(NS) - IP/IPX/AT Router with 128-bit	112, 122, 132, 142	8 MB	4 MB	4	MB for 132
Encryption				2	MB for all others
(VE) - VPN IP/IPX/AT Router with	115, 125, 135, 145	8 MB	8 MB	4	MB
Quick Step VPN and 56-bit
Encryption
(OE) - Multiprotocol Router with	117, 127, 137, 147	12 MB	8 MB	4	MB
56-bit Encryption
(OS) - Multiprotocol Router with	117, 127, 137, 147	12 MB	8 MB	4	MB
128-bit Encryption
(VW)- Multiprotocol Rou;r	147	12 MB	8 MB	4MB
PathBuilder S5xx Switch
(PW) - Multiprotocol Router	S500, S580, S593,	160 MB	16 MB	4	MB
	S594
(PE) - Multiprotocol Router with	S500, S580, S593,	160 MB	16 MB	4	MB
56-bit Encryption	S594
(PS) - Multiprotocol Router with	S500, S580, S593,	160 MB	16 MB	4	MB
128-bit Encryption	S594

Checking DRAM To check how much DRAM you have installed on the switch or bridge/router, on the NMS use:

bcmuname -M <device>

Where <device> is the IP address or hostname of the switch or bridge/router.

Checking Flash Memory To check how much flash memory you have installed on the switch or bridge/router, on the NMS use:

bcmdf <device>[:<drive:>]

Where <device> is the hostname or the IP address of the switch or bridge/router.

Specify drive A for NETBuilder II bridge/routers or PathBuilder switches.

Do not specify a drive for SuperStack II or OfficeConnect bridge/routers.