3Com ENTERPRISE OS 11.3 bcmupdate, Specifies slot of an I/O module within the bridge/router. This

Utility Descriptions and Syntax 83

Description The bcmuname utility displays system information about the specified bridge/router or switch or Intelligent I/O module (IIO). If no options are specified, all the device-level options are printed.

Values	Specifies either the hostname or the IP address of the
<device>
	bridge/router.
<slot>	Specifies slot of an I/O module within the bridge/router. This
	parameter is optional and is used only with the options
	marked with (IIO).
<drive>	Specifies the storage device (usually a flash drive) attached to
	a bridge/router. This parameter is optional. When you specify
	letters A: or B: they are assumed to be drive letters, any
	numeric character is assumed to be a slot designator.
Options	Prints the @m mac address (used in bcmcp) (IIO).
-2
-@	Prints the @M mac address (used in bcmcp) (IIO).
-a	Prints all the above information (IIO).
-c	Prints the contact information.
-d	Prints the tftp directory that will be used by bcmcp.
-f:<sys_filename>	Displays system information based on the contents of the
	specified <path>/sys file.
-l	Prints the machine location.
-M	Prints the memory type.
-m	Prints the machine platform name (IIO).
-n	Prints the node name.
-r	Prints the software release (IIO).
-R	Prints the major software release.
-s	Prints the software system name.
-t	Prints the software or firmware type.
-w	Prints the firmware release.

If an option is required, it must be specified in very stage of the upgrade process.

bcmupdate

Syntax bcmupdate -f:<from_path> -t:<to_path> [options]

Description The bcmupdate utility converts the bridge/router or switch configuration files that work with an older version of software to files that work with the newer version of software. 3Com recommends that this utility only be invoked with the bcmsysupgrade utility script.

Values

-f:<path>	Path to upgrade from.
-t:<path>	Path to upgrade to.

Options

-v:<version> Version to upgrade from.