3Com ENTERPRISE OS 11.3 The required files ipaddressdrive/config file path could not be located

The bcmtest utility was unable to verify the presence of a file or directory.

Make sure that the required files and directories are available to the bcmtest utility.

86APPENDIX A: TROUBLESHOOTING

The required file(s) <ipaddress>:<drive>:/<config file path> could not be located.

Meaning:

Action:

Return Codes from The bcmdiagnose utility can display the following exit return codes: bcmdiagnose

Table 6 bcmdiagnose Return Codes

Code Meaning

0The operation was successful.

1A command line parsing error occurred.

2A command line argument is invalid.

3A installation error occurred.

4A Enterprise OS Upgrade Management utility failed.

5The device is not responding.

6Internal parsing error.

7A UNIX command failed.

8The device configuration is incompatible with the operation.

9The attempted operation is unsafe.

10No arguments in a function call.

11No sys file was found.

12The boot image was not found.

13The boot image is bad.

14The module upgrade failed.

15The module failed to reboot.

16The boot image is not set.

17Missing device address (DNS name or IP address).

18The Enterprise OS software is not installed.

19Error installing a Enterprise OS SW or FW package.

20An error occurred during a UNIX file copy.

21Enterprise OS software installation not performed.

22Failed to perform a software upgrade.

22Failed to perform firmware upgrade.

23Test-Boot and/or reboot timed-out.

24The Upgrade of the device and image is not supported.

25A critical file was missing or corrupted in a file transfer.