3Com ENTERPRISE OS 11.3 manual bcmsetup, bcmsysupgrade

	Utility Descriptions and Syntax 81
-new_hw	Used to restore software to a new bridge/router or switch. Use
	this option when a failed bridge/router or switch is exchanged for
	a new one. After IP and SNMP connectivity is established, use this
	option to copy the original software to the new bridge/router or
	switch.

bcmsetup

Syntax For UNIX:

bcmsetup <packages> [install_directory]

For Windows:

bcmsetup <drive:> [all bcm nat]

Description The bcmsetup utility places the latest version of the Enterprise OS Upgrade Management Utilities on the network managment station. It also sets up the initial package definitions for use by Transcend. You must be root to run the bcmsetup utility.

Values	Installs both the utilities and package definitions (bcm and
all
	nat).
bcm	Enterprise OS Upgrade Management Utilities.
nat	Package definitions for use by Transcend.
Options	Defines the directory where the utilities and other files set up
[Install_directory]
UNIX only	with bcmsetup are to be located.

Default For UNIX, unless an alternate installation directory is specified, the utilities are installed in the /usr/3Com/bcm directory.

For Windows, the utilities are always installed in \usr\3Com\bcm.

<drive:>	Identifies the target drive where the utilities and other files set
	up with bcmsetup are to be located.

bcmsysupgrade

Syntax bcmsysupgrade [options] <stage> <device>

Description The bcmsysupgrade utility is a master script that assists you in upgrading a bridge/router to the latest version of software and/or firmware. The bcmsysupgrade utility uses many of the other Enterprise OS Upgrade Utilities to perform a complete upgrade of a bridge/router over the network.

Values

<stage>
-s:from_nb	Downloads configuration files from the bridge/router.
-s:update	Upgrades configuration files on the network
	management station.
-s:to_nb	Uploads configuration and image files to the
	bridge/router.
-s:test_boot *	Test boots the upgraded configuration.