3Com ENTERPRISE OS 11.3 manual bcmdf

76CHAPTER 8: REFERENCE FOR THE UPGRADE MANAGEMENT UTILITIES

Values	Identifies the bridge/router that receives the changes specified by the
<device>
	bcmctrl utility.
<slot>	Specifies the slot where the I/O module is located that receives the
	changes specified by the bcmctrl utility.
Options		Copies the complete set of boot parameters from the test boot
-u[pdate]
		source to the primary boot source.This operation is typically
		performed after a successful test reboot to ensure that the next
		normal reboot uses the same parameters.
-s[wap]		Swaps the parameters in the primary and secondary boot sources.
-c[ommit]		Cancels the test reboot countdown timer. This stops the automatic
		test reboot begun by the test reboot parameter.
-r[eboot]*		Reboots the bridge/router or switch or the I/O module specified by
		the <slot> parameter.
-t[estreboot]:		Reboots the bridge/router or switch from the test boot source so
[<seconds>]*		that if this command is not used again with the -c option, the
		bridge/router automatically reboots with its primary configuration.
		The optional seconds parameter indicates the length of time in
		seconds the bridge/router should count down before automatically
		rebooting. If you do not supply a value for <seconds>, the default
		value of 120 seconds is used.
-q:r[eboot]		Queries the reboot status of the bridge/router or switch or I/O
		module specified by the <slot> parameter.
-q:t[ransfer]		Queries the transfer status of the bridge/router or switch.
-w:r[eboot]		Waits for the bridge/router or switch to reboot.
-w:t[ransfer]		Waits for the last requested transfer to complete.

The options marked with an asterisk will reboot the bridge/router or individual modules.

bcmdf

Syntax bcmdf <device>[:<drive:>]

Description The bcmdf utility displays the amount of total and available disk space.

Values

<device>	The hostname or the IP address of the bridge/router or
	switch.
<drive:>	The device drive that holds the disk for which the amount of
	total and available disk space will be counted and displayed.

Options No available options