3Com ENTERPRISE OS 11.3 manual Upgrading, Select Verify Upgrade Services Diagnose and click Apply

54CHAPTER 6: UPGRADING THE SOFTWARE IMAGE ONLY

Verifying the Before upgrading, run the diagnostic utility in Upgrade Link to verify connectivity Bridge/Router for to the bridge/router by following these steps:

Upgrading

1Choose a bridge/router or switch from the pop-up list in the Console page, or click New to enter the IP address or hostname. The pop-up list contains bridge/routers or switches that you have upgraded or backed-up before.

2Select Verify Upgrade Services (Diagnose) and click Apply.

The Settings Page appears. Select the appropriate settings and click OK to close the window.

The Status page appears showing the results of the diagnostic tests.

3If the Status page shows a failure, check the SNMP read/write community string and FTP/TFTP server settings.

If the Status page shows a success, click Home to continue with the upgrade and return to the console page.

Upgrading the Image To upgrade the image, follow these steps:

1Run Upgrade Link if you have not already done so.

2Choose a bridge/router or switch from the pop-up list in the Console page, or click New to enter the IP address or hostname. The pop-up list contains bridge/routers or switches that you have upgraded or backed-up before.