Installation and Setup Contents |
|
Introduction | 1 |
About Data Manager | 1 |
Related documents | 1 |
Installation and setup overview | 2 |
Installing Data Manager for the first time | 2 |
Upgrading Data Manager | 2 |
Step 1 – Install Data Manager and DLA software | 3 |
Computer requirements | 3 |
Privileges required for Data Manager | 3 |
Installing Data Manager software | 4 |
Installing Digital Library Assistant (DLA) software | 5 |
Step 2 – Install | 6 |
Before you begin | 6 |
If you have problems | 6 |
Step 2.1 - Install the new | 6 |
Step 2.2 - Check the | 7 |
Procedure | 7 |
Removing a memory card | 8 |
Step 2.3 - Configure memory card eject privileges | 8 |
Step 3 – Determine import/export format requirements | 9 |
Step 3.1 – Determine | 9 |
Step 3.2 – Generate list files | 9 |
Step 4 – Create list folders | 10 |
Step 4.1 – Create | 10 |
Step 4.2 – Move the list files into the correct folders | 10 |
Step 4.3 – Start Data Manager software | 11 |
Step 4.4 – Specify list folder and export/import locations | 12 |
Step 5 – Define list barcode validation parameters | 13 |
Step 6 – Set export parameters | 14 |
14 | |
About location IDs | 14 |
Step 6.1 – Create export formats | 15 |
To create export formats | 15 |
Designating a default export format (optional) | 16 |
Step 6.2 – Set up Duplicate Item Definitions (optional) | 17 |
© 3M 2011. All rights reserved.