Spare Parts/Service Information
Recommended Spare Parts
Listed are a set of spare parts that will periodically require replacement due to normal wear. These parts should be ordered to keep the taping heads in production:
AccuGlide™ 3 Upper Taping Head - 2 inch |
| ||
Qty. | Ref. No. | Part Number | Description |
4 | Stud – Mounting | ||
1 | Spring – Upper Extension | ||
1 | Blade – 65mm/2.56 Inch | ||
2 | Spring – Cutter | ||
1 | - | Tool – Tape Threading | |
|
| ||
AccuGlide™ 3 Lower Taping Head - 2 inch |
| ||
Qty. | Ref. No. | Part Number | Description |
1 | Blade – 65mm/2.56 Inch | ||
2 | Spring – Cutter | ||
4 | Stud – Mounting | ||
1 | Spring – Lower Extension | ||
1 | - | Tool – Tape Threading | |
|
|
|
|
In addition to the above set of spare parts supplied with the taping head, it is suggested that the following spare parts be maintained which will require replacement under normal wear of the taping head.
Qty. | Ref. No. | Part Number | Description |
1 | Roller – Applying | ||
1 | Roller – Buffing | ||
1 | Spring – Torsion | ||
|
|
|
|
Replacement Parts and Service
Refer to the first page of this instruction manual “Replacement Parts and Service Information".
AccuGlide 3 Taping Head - 2" | 19 | 2009 February |
|
