3M 800ab manual Unpacking, Uncrating, Removal of Pallet, Disposal of Packaging Materials

6-UNPACKING

6.1 Uncrating

The envelope attached to the shipping box contains the uncrating instructions of the machine (Figure 6-1).

Figure 6-1

Cut straps. Cut out staple positions along the bottom of the shipping box (or remove staples with an appropriate tool - Figure 6-2).

Figure 6-2

After cutting out or removing the staples, lift the shipping box in order to clear the machine (two persons required).

Figure 6-3

Transport the machine with a fork-lift truck to the operating position. Lift the pallet at the point indicat- ed in Figure 6-3(weight of machine + pallet = See Specificaions).

Removal of Pallet

Loosen and remove nuts and brackets using the open end spanner supplied in the tool box (Figure 6-4).

Figure 6-4

A cardboard box is located under the machine body. Retrieve the instruction manual for additional proce- dures of the set up. The box also contains parts re- moved for shipping, spare parts and tools (Figure 6-5).

Figure 6-5

6.2 Disposal of Packaging Materials

The 800ab-NA package is composed of:

-Wooden pallet

-Cardboard shipping box

-Wooden supports

-Metal fixing brackets

-PU foam protection

-PP plastic straps

-Dehydrating salts in bag

-Special bag of laminated polyester/aluminium/ Polyethylene (sea freight package only)

-Polyethylene protective material

For the disposal of the above materials, please follow the environmental directives or the law in your country.

800ab-NA

16

2010 December