Replacement Parts Illustrations and Parts Lists
AccuGlide™ 3 Upper Taping Head - 2 inch, Type 10800
AccuGlide™ 3 Lower Taping Head - 2 inch, Type 10800
1.Refer to the Taping Head Assemblies Figure to find all the parts illustrations identified by f gure numbers.
2.Refer to the figure or figures to determine the individual parts required and the parts reference number.
3 . The replacement parts list, that follows each illustration, includes the part number and part description for the parts in that illustration.
Note – The complete description has been included for standard fasteners and some commercially available components. This has been done to allow obtaining these standard parts locally, should the customer elect to do so.
4.Refer to the first page of this instruction manual "Replacement Parts and Service Information" for replacement parts ordering information.
IMPORTANT – Not all the parts listed are normally stocked items. Some parts or assemblies shown are available only on a special order basis. Contact 3M/Tape Dispenser Parts to confirm item availability.
AccuGlide 3 Taping Head - 2" | 20 | 2009 February |
|
