SHIPMENT-HANDLING-STORAGE, Transport | 3M 800ab specification

5-SHIPMENT-HANDLING-STORAGE, TRANSPORT

5.1 Shipment and Handling of Packed Machine


						W
- The machine is ﬁxed on the pallet with four (4) bolts				L		W
				L

and can be lifted by using a fork truck.
- The package is suitable to travel by land and by air.
- Optional sea freight package is available.
- Optional sea freight package is available.		H
		H
Packaging Overall Dimensions
(Figure	5-1)

See Speciﬁcations.	Figure 5-1

During the shipment it is possible to stack a maximum of 2 machines (Figure 5-2).

5.2Packaging for Overseas Shipment (Optional - Figure 5-3)

The machines shipped by sea freight are covered by an aluminum/polyester/polythene bag which contains dehydrating salts.

5.3Handling and Transportation of Uncrated Machine

The uncrated machine should not be moved except for short distances and indoors ONLY. Without the sup- porting pallet, the machine is exposed to damage and may cause injuries. To move the machine use belts or ropes, paying attention to place them in the points in- dicated using care to not interfere with the lower taping head (Figure 5-4).

5.4 Storage of the Packed or Unpacked Machine

If the machine is not used for a long period, please take the following precautions:

-Store the machine in a dry and clean place.

-If the machine is unpacked it is necessary to protect it from dust.

-Do not stack anything over the machine.

-It is possible to stack a maximum of 2 machines (if they are in their original packing).

800ab-NA

15

Figure 5-2

Figure 5-3

Figure 5-4

2010 December

Image 27

3M 800ab manual SHIPMENT-HANDLING-STORAGE, Transport, Packaging for Overseas Shipment Optional Figure

Contents

3M 2010 44-0009-2082-5 B121510-NA Industrial Adhesives and Tapes 3M-MaticTM800ab-NAAdjustable case sealer 3M Center, Building 220-5E-06 St. Paul, MN This page is Blank 3M 2010 44-0009-1852-2 F031008-NA This page is Blank Safety IntroductionGeneral Information This page is Blank Set-Up and Adjustments Table of Contents Shipment, Handling, and StorageInstallation Safety devices This page is Blank Technical Documentation and Information Table of Contents OperationMaintenance Additional Instructions Abbreviations and Acronyms List of ABBREVIATIONS, Acronyms 3M-MaticTM800ab Adjustable Case Sealer, Type IntroductionManufacturing Specif cations / Description / Intended Use Manual Maintenance Importance of the ManualConsulting the Manual General Information Contents-800ab Adjustable Case Sealer Safety General Safety InformationStop Switch To reduce the risk associated with hazardous voltage To reduce the risk associated with sharp blade hazards To reduce the risk associated with muscle strainTo reduce the risk associated with pinches hazards Instructions for a Safe Use of the Machine Personal Safety MeasuresOperators Qualif cations See Section Number of Operators Skill 1 Machine Operator 800ab Case Sealer Components Left Front View Component Locations Safety Operating Conditions SpecificationsPower Requirements Operating Rate Tape Application Leg Length Optional Specifications Specif cations Tape Roll DiameterBox Weight and Size Capacities Tape Application Leg Length Standard Set-Up Recommendations Storage of the Packed or Unpacked Machine SHIPMENT-HANDLING-STORAGE, TransportPackaging for Overseas Shipment Optional Figure Handling and Transportation of Uncrated Machine Disposal of Packaging Materials UnpackingUncrating Removal of Pallet Machine Set-Up / Bed Height InstallationM8 x 16mm Socket Head Screws Adjustable Tool Kit Supplied with the Machine M6 Plain Washer Inclined Roller Assembly Buff ng M6 Lock NutRoller Machine Connection to the Mains Inspection of PhasesPreliminary Electric Inspection For Three-Main Phases Only Outboard Tape Roll Holder Theory of Operation Controls Emergency Stop Button Safety Devices of the MachineStop Switch Electric System / Circuit Breaker Blade Guards SET UP and Adjustments Operation Operation Troubleshooting Guide Problem Cause Correction This page is Blank Cleaning of Cutter Blade Qualif cation Maintenance and RepairsCheck Eff ciency of Safety Features Cleaning of Machine Qualif cation Box Drive Belt Left Side View Infeed End Drive Belt Replacement Drive Pulley Rings Installation Box Drive Assembly, Infeed End Drive Belt Tension Tape LEG Length Reassemble Figure Disassemble Figure 11C Master Link Mark Chain Sprocket 10 Crank/Chain Guards This page is Blank 800ab-NA December This page is Blank Case of Fire Additional Instructions Enclosures / Special Info This page is Blank Electric Diagram Technical Diagrams Label Kit Machine Model Serial Number Part Number Option/Accessory Options and Accessories This page is Blank 800ab-NA December 800ab 800ab 15407 Ref. No 3M Part No Description 800ab Front 800ab Ref. No 3M Part No Description 800ab Rear 800ab Ref. No 3M Part No Description 22 46 457 7 800ab 6174 Ref. No 3M Part No Description Optional 800ab Ref. No 3M Part No Description 410 800ab Ref. No 3M Part No Description 800ab 800ab Ref. No 3M Part No Description 800ab 6176-8 800ab 6176 Ref. No 3M Part No Description 123 800ab Ref. No 3M Part No Description This page is Blank AccuGlideTM Page Replacement Parts and Service Information To Our Customers This page is Blank 3M 2009 44-0009-1852-2 F031008 This page is Blank Dimensional Drawing AccuGlide 3 Taping Head February AccuGlide 3 Upper Taping Head 2 inch, Type Intended Use This page is Blank Updating the Manual General Information How to use this Manual Them Before Installing or Operating this Equipment To reduce the risk associated with impact hazardsTo reduce the risk associated with mechanical hazards Upper Taping Head Label Lower Taping Head Label Important Safeguards Box Size Capacities Taping Head DimensionsSpecif cations Tape Tape Width Dimensional Drawing To reduce risk associated with muscle strain Installation GuidelinesTape Width Adjustment Receiving And Handling AccuGlide 3 Taping Head February Operation on next Tape Loading Upper Taping Head Tape Loading Lower Taping HeadOne-Way Tension Roller Wrap Knurled Applying AccuGlide 3 Taping Head February Blade Guard Knife Holder Guard Blade Replacement Hex Socket Section View 5mm HexRoller/Shaft Key Wrench Applying/Buff ng Roller Replacement Tape Drum Friction Brake Figure Tape Latch Alignment Figure One-Way Tension Roller Applying Mechanism Spring Changing Tape Leg Length Leading Tape Leg Length Adjustment FigurePage Page Spare Parts/Service Information Recommended Spare Parts Replacement Parts and ServiceQty Ref. No Part Number Description Page 10922 10923 Upper Head AccuGlide 3 Taping Head February Upper Head Ref. No 3M Part No Description Upper and Lower Heads Upper and Lower Heads Ref. No 3M Part No Description Upper Head Upper Head Ref. No 3M Part No Description Upper and Lower Heads AccuGlide 3 Taping Head August Upper and Lower Heads Ref. No 3M Part No Description AccuGlide 3 Taping Head August Upper and Lower Heads Ref. No 3M Part No Description Upper and Lower Heads AccuGlide 3 Taping Head February Latch Upper and Lower Heads Ref. No 3M Part No Description Lower Head AccuGlide 3 Taping Head February Lower Head Ref. No 3M Part No Description Lower Head Lower Head Ref. No 3M Part No Description This page is Blank