Operation (Continued)
Figure
Place tape roll on tape drum to dispense tape with adhesive side forward. Seat tape roll fully against back flange of drum. Adhere tape lead end to threading needle as shown.
WARNING
•To reduce the risk associated with sharp blade hazards:
-Keep hands and fingers away from tape cutoff blades under orange blade guards. The blades are extremely sharp.
Manually turn tape roll to create slack tape while pulling threading needle through tape applying mechanism until needle is through and tape is in alignment with applying roller.
Excess tape can be cut with a scissors at applying roller.
Figure 3-4 – Tape Loading/Threading
Figure 3-5 – Tape Loading/Threading
AccuGlide 3 Taping Head - 2" | 11 | 2009 February |
|
