Taping Head Contents
AccuGlide™ 3 Upper and Lower Taping Heads - 2 Inch - consists of:
Qty. Part | Name |
1 | Taping Head Assembly |
1 | Tape Drum and Bracket Assembly |
1 | Hardware and Spare Parts Kit |
1 | Threading Tool |
General Information
This instruction manual covers safety aspects, handling and transport, storage, unpacking, preparation, installa- tion, operation,
© 3M 2009.
How to use this Manual
The manual is an important part of the machine; all information contained herein is intended to enable the equip- ment to be maintained in perfect condition and operated safely. Ensure that the manual is available to all opera- tors of this equipment and the manual is kept up to date with all subsequent amendments. Should the equipment be sold or disposed of, please ensure that the manual is passed on with the machine.
Electrical and pneumatic diagrams are included in the manual. Equipment using PLC controls and/or electronic components will include relevant schematics or programs in the enclosure (or will be delivered separately as needed)
Keep the manual in a clean and dry place near the machine. Do not remove, tear or rewrite parts of the manual for any reason. Use the manual without damaging it. However, if the manual has been lost or damaged, ask your after sale service for a new copy (if it is possible, please have the manual name, part number, and revision infor- mation and/or model/machine name, machine type, and serial number) that are located on the identification plate (For example: Model 700a - Type 39600 - Serial Number 13282).
NOTE:
All the important warning notes related to the operation of the machine are identified by the symbol:
Updating the Manual
Modifications to the machine are subject to manufacturer's internal procedures. The user may receive pages or parts of the manual which contain amendment made after its first publication. The user must use them to update this manual.
AccuGlide 3 Taping Head - 2" | 3 | 2009 February |
|
