Aastra Telecom 1000 PBX Setup, General, Adding a Service Provider, Deleting a Service Provider

Adding a Service Provider

1.Select a service provider from the drop-down box to the left of the Trunks list.

2.Click Add. The service provider will appear in the list.

3.Click on the Name of the provider.

4.Click the Up or Down button to position the service provider in the list in the order calls are to be routed over this resource.

Deleting a Service Provider

1.Click on a Service Provider in the list.

2.Click Delete.

3.Click on Save Changes.

4.Click on Apply Changes when ready to implement these changes to the system.

Implementation Note 5

Default Settings For Existing Routes

The Outgoing Call Routes already in the IPitomy 1000 have the following default settings Route Type and route Number. These default settings cannot be changed. The Name of the route, service provider associated with the route and the order in which service providers are selected for the route can be changed.

PBX Setup

PBX setup is used by a System Administrator to manage system-specific and system-wide capabilities of the IPitomy1000.

General

General setup manages the Administrative Settings for the system: User Name, Password and Time Zone.

Edit General Settings

1.Click on PBX Setup and General. The General System Setup page will appear.

2.Enter an Administrative User Name.

3.Enter an Administrative Password.

4.Re-enter the Password.

5.Select a Time Zone from the drop-down box provided.

6.Select a System Operator Destination. This is the destination that people will go to when pressing ‘0’ while in a voicemail box, if Allow Operator is enabled on a voicemail box.

Copyright
IPitomy Communication, LLC 88 0007VRF