Copyright IPitomy Communicati on, LLC 27 0007VRF
Application Forwarding
Single Port
On this screen, forwarding applications per port basis to specified network serv ers is
customized. Once configured, the requests received from Internet for the con figured
application and through the specified port will be forwarded to the appro priate servers
(computers). Before using forwarding, static IP addresses should be assigned to the
designated servers (use the DHCP Reservation feature on the Networking/TCP/IP
Settings screen).
Single Port Forwarding
Common applications are available for the first five entries. Select the a ppropriate
application, then enter the IP address of the server that should receive these requests.
Click the Enabled checkbox to activate this entry.
For additional applications, complete the following fields:
Application Name – Enter the name of the application.
External Port – Enter the external por t number used by the server or Internet
application. Check the Internet application documentation for more information.
Internal Port – Enter the internal port nu mber used by the server or Internet
application. Check the Internet application documentation for more information.
Protocol – Select the protocol TCP or UDP, or select Both.
To IP Address – Enter the IP address of the server that should receive the requests.
Enabled – Click the Enabled checkbox to enable the applications you h ave defined.