Aastra Telecom 1000 Extensions

number or you can check the messages by going through t he voicemail gateway or

dialing 924.

 Schedules route callers to different des tinations or people in the organization during

specified times and dates.

 Branch Office connections provide broadband access to other branch loca tions by

dialing a short access code followed by the extension number . Branch Extensions

can also be defined as part of a branch office. These ar e remote extensions that can

be dialed directly as though they were local extensions on your PBX. Branch

Extensions also appear in drop down boxes for routing c alls to specific destinations.

These system destinations (where and to whom calls will be routed) should be planned in

advance. In most cases, there will be a menu to setup for an automated attendant. There will also

be business hours to setup. The IPitomy 1000 Installation Worksheet helps organize

provisioning information prior to installation.

Extensions

Extensions define where specific people or departments can be reache d in an

organization. They should be setup first in the system. Once extensions are setup then

the rest of the application can be provisioned.

 Auto Discovery - This network discovery tool identifies phones and other devices

connected to the network and allows you to remotely configure ne tworked phones.

 CSV Upload – Easily upload one CSV file and auto cre ate all extensions.

 Add Range – This allows you to easily mass create extensions.

 Phone Settings - This tool allows you to modify a phon e’s keys. It includes support

for all Aastra model phones.

 General Settings – Iden tifies the owner of the extension, email address, extension

and password information.

 Forward S ettings – Sets the forwarding behavior. Calls can be forwarded to local

destinations, PSTN and cell numbers.

 Network Settings – These are extension authentication settings for SIP registration

with the IPitomy 1000. This is also where selecting the model of telephone for Auto

Configuration and changing button mapping is done.

 CODEC Permissions – The quality of voice transmission and b andwidth utilization