Port Configuration 3

Command Attributes

•Member List (Current) – Shows configured trunks (Unit, Port).

•New – Includes entry fields for creating new trunks. - Port – Port identifier. (Range: 1-8)

Web – Click Port, LACP, Configuration. Select any of the switch ports from the scroll-down port list and click Add. After you have completed adding ports to the member list, click Apply.

Figure 3-55 LACP Trunk Configuration

CLI – The following example enables LACP for ports 1 to 6. Just connect these ports to LACP-enabled trunk ports on another switch to form a trunk.

Console(config)#interface

ethernet 1/1

4-125

Console(config-if)#lacp

 

4-139

Console(config-if)#exit

 

 

.

 

 

.

 

 

.

 

 

Console(config)#interface

ethernet 1/6

 

Console(config-if)#lacp

 

 

Console(config-if)#end

 

 

Console#show interfaces status port-channel 1

4-130

Information of Trunk 1

 

 

Basic information:

 

 

Port type:

10G

 

Mac address:

00-30-F1-D4-73-A2

 

Configuration:

 

 

Name:

 

 

Port admin:

Up

 

Speed-duplex:

10G full

 

Capabilities:

 

 

Port security:

Disabled

 

Max MAC count:

0

 

Current status:

 

 

Created by:

LACP

 

Link status:

Up

 

Port operation status:

Up

 

Operation speed-duplex:

10G full

 

Flow control type:

None

 

Member Ports: Eth1/1, Eth1/2, Eth1/3, Eth1/4,

Console#

3-93