Basic Configuration 3

Basic Configuration

Displaying System Information

You can easily identify the system by displaying the device name, location and contact information.

Field Attributes

•System Name – Name assigned to the switch system.

•Object ID – MIB II object ID for switch’s network management subsystem.

•Location – Specifies the system location.

•Contact – Administrator responsible for the system.

•System Up Time – Length of time the management agent has been up.

These additional parameters are displayed for the CLI.

•MAC Address – The physical layer address for this switch.

•Web server – Shows if management access via HTTP is enabled.

•Web server port – Shows the TCP port number used by the web interface.

•Web secure server – Shows if management access via HTTPS is enabled.

•Web secure server port – Shows the TCP port used by the HTTPS interface.

•Telnet server – Shows if management access via Telnet is enabled.

•Telnet server port – Shows the TCP port used by the Telnet interface.

•Authentication login – Shows the user login authentication sequence.

•Jumbo Frame – Shows if jumbo frames are enabled.

•POST result – Shows results of the power-on self-test

Web – Click System, System Information. Specify the system name, location, and contact information for the system administrator, then click Apply. (This page also includes a Telnet button that allows access to the Command Line Interface via Telnet.)

Figure 3-3 System Information

3-9