Priority Commands 4

•DSCP priority values are mapped to default Class of Service values according to recommendations in the IEEE 802.1p standard, and then subsequently mapped to the eight hardware priority queues.

•This command sets the IP DSCP priority for all interfaces.

Example

The following example shows how to map IP DSCP value 1 to CoS value 0:

Console(config)#interface ethernet 1/5

Console(config-if)#map ip dscp 1 cos 0

Console(config-if)#

show map ip port

This command shows the IP port priority map.

Syntax

show map ip port [interface]

interface

•ethernet unit/port

-unit - This is unit 1.

-port - Port number. (Range: 1-8)

•port-channel channel-id(Range: 1-4)

Default Setting

None

Command Mode

Privileged Exec

Example

The following shows that HTTP traffic has been mapped to CoS value 0:

Console#show map

ip

port

TCP port

mapping

status: disabled

Port

Port no. COS

--------- --------

---

Eth 1/

5

80

0

Console#

 

 

 

 

 

 

 

Related Commands

map ip port (Global Configuration) (4-191) map ip port (Interface Configuration) (4-191)

4-195