Accton Technology ES5508 Line Commands

	Line Commands	4
	Table 4-4 Command Group Index (Continued)
Command Group	Description	Page
Spanning Tree	Configures Spanning Tree settings for the switch	4-150
VLANs	Configures VLAN settings, and defines port membership for VLAN	4-168
	groups; also enables or configures private VLANs and protocol VLANs
GVRP and	Configures GVRP settings that permit automatic VLAN learning;	4-181
Bridge Extension	shows the configuration for the bridge extension MIB
Priority	Sets port priority for untagged frames, selects strict priority or weighted	4-185
	round robin, relative weight for each priority queue, also sets priority for
	TCP/UDP traffic types, IP precedence, and DSCP
Multicast Filtering	Configures IGMP multicast filtering, query parameters, and specifies	4-197
	ports attached to a multicast router
IP Interface	Configures the IP address and gateway for management access	4-205
DNS	Configures DNS services.	4-210

The access mode shown in the following tables is indicated by these abbreviations:

PE (Privileged Exec)	VC (VLAN Database Configuration)
NE (Normal Exec)	MST (Multiple Spanning Tree)
GC (Global Configuration)	LC (Line Configuration)
IC (Interface Configuration)	ACL (Access Control List Configuration)

Line Commands

You can access the onboard configuration program by attaching a VT100 compatible device to the server’s serial port. These commands are used to set communication parameters for the serial port or Telnet (i.e., a virtual terminal).

Table 4-5 Line Commands

Command	Function	Mode	Page
line	Identifies a specific line for configuration and starts the line	GC	4-10
	configuration mode
login	Enables password checking at login	LC	4-11
password	Specifies a password on a line	LC	4-12
timeout login	Sets the interval that the system waits for a login attempt	LC	4-12
response
exec-timeout	Sets the interval that the command interpreter waits until user	LC	4-13
	input is detected
password-thresh	Sets the password intrusion threshold, which limits the number of	LC	4-14
	failed logon attempts
silent-time*	Sets the amount of time the management console is inaccessible	LC	4-14
	after the number of unsuccessful logon attempts exceeds the
	threshold set by the password-thresh command
databits*	Sets the number of data bits per character that are interpreted and	LC	4-15
	generated by hardware

4-9