Accton Technology ES5508 manual 312

4 Command Line Interface

Example

Console(config)#interface ethernet 1/12

Console(config-if)#match access-list ip bill set dscp 0

Console(config-if)#

Related Commands

show marking (4-100)

show marking

This command displays the current configuration for packet marking.

Command Mode

Privileged Exec

Example

Console#show marking Interface ethernet 1/12

match access-list IP bill set DSCP 0 match access-list MAC a set priority 0

Console#

Related Commands

match access-list ip (4-99)

MAC ACLs

Table 4-36 MAC ACL Commands

Command	Function	Mode	Page
access-list mac	Creates a MAC ACL and enters configuration mode	GC	4-101
permit, deny	Filters packets matching a specified source and	MAC-ACL	4-102
	destination address, packet format, and Ethernet type
show mac access-list	Displays the rules for configured MAC ACLs	PE	4-103
access-list mac	Changes to the mode for configuring access control masks	GC	4-104
mask-precedence
mask	Sets a precedence mask for the ACL rules	MAC-Mask	4-104
show access-list mac	Shows the ingress or egress rule masks for MAC ACLs	PE	4-106
mask-precedence
mac access-group	Adds a port to a MAC ACL	IC	4-107
show mac access-group	Shows port assignments for MAC ACLs	PE	4-107
map access-list mac	Sets the CoS value and corresponding output queue for	IC	4-108
	packets matching an ACL rule
show map access-list mac	Shows CoS value mapped to an access list for an interface	PE	4-108
match access-list mac	Changes the 802.1p priority of a frame matching the	IC	4-109
	defined rule (i.e., also called packet marking)
show marking	Displays the current configuration for packet marking	PE	4-100

4-100