Flash/File Commands 4

Example

The following example shows how to display all file information:

Console#dir

 

 

 

file name

file type

startup size (byte)

-------------------------------------

--------------

------- -----------

Unit1:

 

 

 

D3006

Boot-Rom Image

Y

1164420

V3002

Operation Code

Y

3152916

Factory_Default_Config.cfg

Config File

N

455

startup1.cfg

Config File

Y

979

---------------------------------------------------------------------------

Total free space: 27656192

Console#

whichboot

This command displays which files were booted when the system powered up.

Default Setting

None

Command Mode

Privileged Exec

Example

This example shows the information displayed by the whichboot command. See the table under the dir command for a description of the file information displayed by this command.

Console#whichboot

 

 

 

file name

file type startup size (byte)

-------------------------------- ----------------------- ------- -----------

Unit1:

 

 

 

D1013

Boot-Rom image

Y

823480

V30071

Operation Code

Y

3421124

startup1.cfg

Config File

Y

10091

Console#

 

 

 

boot system

This command specifies the file or image used to start up the system.

Syntax

boot system {boot-rom config opcode}: filename

The type of file or image to set as a default includes:

•boot-rom* - Boot ROM.

•config* - Configuration file.

•opcode* - Run-time operation code.

•filename - Name of configuration file or code image.

* The colon (:) is required.

Default Setting

None

4-67