Accton Technology ES5508 v2c, v2c, v2c, none, none, none, none, none, none, Level, Group, public, public, private, private, Security, AuthPriv, AuthNoPriv, encryption, Provides user

Simple Network Management Protocol 3

security models v1 and v2c. The following table shows the security models and levels available and the system default settings.

Table 3-4 SNMPv3 Security Models and Levels

Model	Level	Group	Read View	Write View	Notify View	Security
v1	noAuthNoPriv	public	defaultview	none	none	Community string only
		(read only)
v1	noAuthNoPriv	private	defaultview	defaultview	none	Community string only
		(read/write)
v1	noAuthNoPriv	user defined	user defined	user defined	user defined	Community string only
v2c	noAuthNoPriv	public	defaultview	none	none	Community string only
		(read only)
v2c	noAuthNoPriv	private	defaultview	defaultview	none	Community string only
		(read/write)
v2c	noAuthNoPriv	user defined	user defined	user defined	user defined	Community string only
v3	noAuthNoPriv	user defined	user defined	user defined	user defined	A user name match only
v3	AuthNoPriv	user defined	user defined	user defined	user defined	Provides user
						authentication via MD5 or
						SHA algorithms
v3	AuthPriv	user defined	user defined	user defined	user defined	Provides user
						authentication via MD5 or
						SHA algorithms and data
						privacy using DES 56-bit
						encryption

Note: The predefined default groups and view can be deleted from the system. You can then define customized groups and views for the SNMP clients that require access.

Enabling the SNMP Agent

Enables SNMPv3 service for all management clients (i.e., versions 1, 2c, 3).

Command Attributes

SNMP Agent Status – Enables SNMP on the switch.

Web – Click SNMP, Agent Status. Enable the SNMP Agent by marking the Enabled checkbox, and click Apply.

Figure 3-24 Enabling the SNMP Agent

3-35