Access Control List Commands 4

access-list mac

This command adds a MAC access list and enters MAC ACL configuration mode. Use the no form to remove the specified ACL.

Syntax

[no] access-list mac acl_name

acl_name – Name of the ACL. (Maximum length: 16 characters)

Default Setting

None

Command Mode

Global Configuration

Command Usage

•An egress ACL must contain all deny rules.

•When you create a new ACL or enter configuration mode for an existing ACL, use the permit or deny command to add new rules to the bottom of the list. To create an ACL, you must add at least one rule to the list.

•To remove a rule, use the no permit or no deny command followed by the exact text of a previously configured rule.

•An ACL can contain up to 32 rules.

Example

Console(config)#access-list mac jerry

Console(config-mac-acl)#

Related Commands

permit, deny (4-102)

mac access-group(4-107) show mac access-list(4-103)

4-101