Basic Configuration 3

To delete a file select System, File Management, Delete. Select the file name from the given list by checking the tick box and click Apply. Note that the file currently designated as the startup code cannot be deleted.

Figure 3-12 Deleting Files

CLI – To download new firmware form a TFTP server, enter the IP address of the TFTP server, select “config” as the file type, then enter the source and destination file names. When the file has finished downloading, set the new file to start up the system, and then restart the switch.

To start the new firmware, enter the “reload” command or reboot the system.

Console#copy tftp file

4-63

TFTP server

ip address: 10.1.0.19

 

Choose file

type:

 

1. config:

2. opcode: <1-2>: 2

 

Source file

name: V3002.bix

 

Destination

file name: V3002

 

\Write to FLASH Programming.

 

-Write to FLASH finish.

 

Success.

 

 

Console#config

 

Console(config)#boot system opcode:V3002

4-67

Console(config)#exit

 

Console#reload

4-21

 

 

 

3-19