Accton Technology ES5508 General Commands

	General Commands		4
General Commands
	Table 4-6 General Commands
Command	Function	Mode	Page
enable	Activates privileged mode	NE	4-19
disable	Returns to normal mode from privileged mode	PE	4-20
configure	Activates global configuration mode	PE	4-20
show history	Shows the command history buffer	NE, PE	4-21
reload	Restarts the system	PE	4-21
end	Returns to Privileged Exec mode	any	4-22
		config.
		mode
exit	Returns to the previous configuration mode, or exits the CLI	any	4-22
quit	Exits a CLI session	NE, PE	4-23
help	Shows how to use help	any		NA
?	Shows options for command completion (context sensitive)	any		NA

enable

This command activates Privileged Exec mode. In privileged mode, additional commands are available, and certain commands display additional information. See “Understanding Command Modes” on page 4-5.

Syntax

enable [level]

level - Privilege level to log into the device.

The device has two predefined privilege levels: 0: Normal Exec,

15: Privileged Exec. Enter level 15 to access Privileged Exec mode.

Default Setting

Level 15

Command Mode

Normal Exec

Command Usage

•“super” is the default password required to change the command mode from Normal Exec to Privileged Exec. (To set this password, see the enable password command on page 4-26.)

•The “#” character is appended to the end of the prompt to indicate that the system is in privileged access mode.

Example

Console>enable

Password: [privileged level password]

Console#

4-19