4 Command Line Interface

Command Usage

•By using this command more than once you can build up a list of host IP addresses.

•The maximum number of host IP addresses allowed is five.

Example

Console(config)#logging host 10.1.0.3

Console(config)#

logging facility

This command sets the facility type for remote logging of syslog messages. Use the no form to return the type to the default.

Syntax

[no] logging facility type

type - A number that indicates the facility used by the syslog server to dispatch log messages to an appropriate service. (Range: 16-23)

Default Setting

23

Command Mode

Global Configuration

Command Usage

The command specifies the facility type tag sent in syslog messages. (See RFC 3164.) This type has no effect on the kind of messages reported by the switch. However, it may be used by the syslog server to sort messages or to store messages in the corresponding database.

Example

Console(config)#logging facility 19

Console(config)#

logging trap

This command enables the logging of system messages to a remote server, or limits the syslog messages saved to a remote server based on severity. Use this command without a specified level to enable remote logging. Use the no form to disable remote logging.

Syntax

logging trap [level] no logging trap

level - One of the syslog severity levels listed in the table on page 4-42.Messages sent include the selected level up through level 0.

4-44