3 Configuring the Switch

CLI – Enter the following command.

Console#show bridge-ext

4-182

Max support VLAN numbers:

256

Max support VLAN ID:

4094

Extended multicast filtering services: No

Static entry individual port:

Yes

VLAN learning:

IVL

Configurable PVID tagging:

Yes

Local VLAN capable:

No

Traffic classes:

Enabled

Global GVRP status:

Disabled

GMRP:

Disabled

Console#

 

 

 

Displaying Current VLANs

The VLAN Current Table shows the current port members of each VLAN and whether or not the port supports VLAN tagging. Ports assigned to a large VLAN group that crosses several switches should use VLAN tagging. However, if you just want to create a small port-based VLAN for one or two switches, you can disable tagging.

Command Attributes (Web)

•VLAN ID – ID of configured VLAN (1-4094).

•Up Time at Creation – Time this VLAN was created (i.e., System Up Time).

•Status – Shows how this VLAN was added to the switch.

-Dynamic GVRP: Automatically learned via GVRP.

-Permanent: Added as a static entry.

•Egress Ports – Shows all the VLAN port members.

•Untagged Ports – Shows the untagged VLAN port members.

Web – Click VLAN, 802.1Q VLAN, Current Table. Select any ID from the scroll-down list.

Figure 3-76 VLAN Current Table

3-136