Accton Technology ES5508 Figure 3-86Traffic Classes

3 Configuring the Switch

Web – Click Priority, Traffic Classes. Assign priorities to the traffic classes (i.e., output queues), then click Apply.

Figure 3-86 Traffic Classes

CLI – The following example shows how to change the CoS assignments to a one-to-one mapping.

Console(config)#interface ethernet 1/1									4-125
Console(config)#queue cos-map 0 0									4-188
Console(config)#queue cos-map 1 1
Console(config)#queue cos-map 2 2
Console(config)#exit
Console#show queue		cos-map							4-190
Information of Eth		1/1
CoS Value:	0	1	2	3	4	5	6	7
Priority Queue: 0		1	2	3	4	5	6	7
Information of Eth		1/2
CoS Value:	0	1	2	3	4	5	6	7
.Priority Queue: 0		1	2	3	4	5	6	7
.
.

*Mapping specific values for CoS priorities is implemented as an interface configuration command, but any changes will apply to the all interfaces on the switch.

3-150