Actron CP9190 manual Read Codes, Tool Setup Menu

Ford Enhanced (OBD II) Diagnostics

–Tool Setup Menu

–English/Metric

–Contrast Adjust

–Beeper

–Setup User Key

IMPORTANT

If the function is not supported by the vehicle, the Scan Tool does not display it.

✓If an Error Message displays, make sure the OBD II connector is securely attached, and the ignition key is on. Cycle the ignition key to off for 10 seconds, then on. This may be required to reset the computer. If required, select yes to try again. If the problem still exists, refer to Error Messages on page 9-2.

Diagnostic Codes Menu

IMPORTANT

All items marked with “-” are covered either in section 3 or 4. These items are not covered in this section.

❒Diagnostic Codes Menu

❒ Read Codes
– Pending Codes	6
– Erase Codes

– View Freeze Data

– Review Data

– Print Data

– Code Lookup

– Tool Setup

Read Codes

✓The Read Codes function retrieves DTCs from the vehicle’s computer module(s). This function can be performed KOEO or KOER. The Read Codes function retrieves all DTCs (MIL, non-MIL and Pending) stored in the vehicle’s computer module(s).

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 6 – 31